🔎 UNIDENTIFIED Copper coin / token ID needed.

The Rebel

Silver Member
Joined
Sep 20, 2011
Messages
2,755
Reaction score
5,582
Golden Thread
1
Location
Southwest, CT
🥇 Banner finds
1
Detector(s) used
Spectra V3i with wireless headphones
Primary Interest:
All Treasure Hunting
Trying to help my buddy id this copper coin or token.

I've spent quite some time looking to id this but I've come up empty.

Thanks in advance!

IMG_20240911_191428.webp
IMG_20240911_191555.webp
 

I think I see the fancy "R" of an "RH" token minted by businessman Richard Hurd in Montreal and dated 1814.
 

Upvote 2
Thanks. I looked at that but the script is more centered and this one has the script closer to the edge.
 

Upvote 0
I think I see the fancy "R" of an "RH" token minted by businessman Richard Hurd in Montreal and dated 1814.
Good IDING 👍

Screenshot_20240911_201326_Chrome.webp
 

Upvote 1
I don't see it as this as l mentioned the script is closer to the edge and not centered
 

Upvote 1
My buddy thinks it might be this but the script is still not to the edge.
Screenshot_20240913-144713.webp
 

Upvote 1
Solution
Hi - can you get us a diameter size and weight? Was it dug in Connecticut?

ty!
 

Upvote 0
Hi - can you get us a diameter size and weight? Was it dug in Connecticut?

ty!
It's about 1", weight is unknown, but I'd say probably the same as any US Copper or KGI, II or III. Dug in CT.
 

Upvote 0
Thank you! An inch is about 25-26mm which would be a little small. I think that would rule out the Anglesey token b/c those are good sized at 28mm+ and usually a heavier weight than the typical copper.
 

Upvote 1
I'll add too that those tokens also usually have edge lettering. Is there any lettering on the edge of this coin?
 

Upvote 1
My bad eyes...
I can't figure out the squiggly side, but I think I may see part of the bottom of a bell on the other side...
... or I'm just seeing things. 🤓
1726602481000.webp
 

Upvote 1
I'll add too that those tokens also usually have edge lettering. Is there any lettering on the edge of this coin?
I don't think so but will check with my buddy.
 

Upvote 0
Bell or neckline
That's what I thought at first, but after looking at dozens of pics of bells & busts on coins, it looked more like the bottom edge of a bell. YMMV.
 

Upvote 1
That's what I thought at first, but after looking at dozens of pics of bells & busts on coins, it looked more like the bottom edge of a bell. YMMV.
I won’t disagree….my first guess was neckline, but probably am wrong…..short answer, yes there is/was something on that side.
 

Upvote 1
if we could get a non blurry photo of the one side that might really help :wink:
 

Upvote 0
It's hard to tell with the pics provided but this may be an Ottoman Empire coin. They were minted in hundreds of varieties over multiple centuries and widely cirrculated around the world. These type coins are difficult for the Western eye to identify - even when they are in good condition.

1971.15.1015.jpg
 

Upvote 2

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom