Copper Seal? What the...???

Cannonman17

Bronze Member
Jul 16, 2006
1,558
33
Wisconsin

Attachments

  • what.jpg
    what.jpg
    7.1 KB · Views: 218
nice looking....do you have shot of the back or is it plain
 

Attachments

  • what.jpg
    what.jpg
    2 KB · Views: 202
Upvote 0
It's an incuse design so the design you see on the front has been "pushed" into it from the back. So it's identical, one side "popped" out and one side pushed in.
 

Upvote 0
cork seal from a wine or champagne bottle ?

I used to use my knife to cut 'em out rather than tearing the top wrap off.

Just one possibility

Diggem'
 

Upvote 0
If it's very thin but hard (not foil-like) copper or brass— and if there is no attachment point on the back, where a shank/eye has broken off— then it may be the die-stamped "face" for a three-piece gilt dress button, with the front and back held together by a separate rim, as on "staff" buttons. Also, some wooden and composition dress buttons had medallic or embossed disc inserts; so, it could be from one of those.
 

Upvote 0

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top