Goes4ever
Silver Member
- Joined
- Jan 30, 2008
- Messages
- 4,949
- Reaction score
- 2,326
- Golden Thread
- 0
- Location
- NorthWest Ohio
- Detector(s) used
- Minelab E-Trac, Equinox 600, and Tesorso compadre
- Primary Interest:
- All Treasure Hunting
- #1
Thread Owner
cud mark possibly?
- Thread starter Goes4ever
- Start date
Goes4ever
Silver Member
- Joined
- Jan 30, 2008
- Messages
- 4,949
- Reaction score
- 2,326
- Golden Thread
- 0
- Location
- NorthWest Ohio
- Detector(s) used
- Minelab E-Trac, Equinox 600, and Tesorso compadre
- Primary Interest:
- All Treasure Hunting
- #4
Thread Owner
see above pic..loltwinsrule said:
oddcoins
Bronze Member
- Joined
- Jun 21, 2006
- Messages
- 2,429
- Reaction score
- 697
- Golden Thread
- 0
- Location
- Eugene Oregon
- Detector(s) used
- Minelab eTrac ~ DetectorPro Pocket Uniprobe
Yeah, rim cud.
Rim cud is different than a regular cud. Rim cud only involves the edge/rim of the coin . . . . . with a regular cud the broken part of the die will extend into the design field of the die.
Typically rim cuds are net very collectable or desireable ~ but I've seen a few big ones that are nice examples.
Rim cud is different than a regular cud. Rim cud only involves the edge/rim of the coin . . . . . with a regular cud the broken part of the die will extend into the design field of the die.
Typically rim cuds are net very collectable or desireable ~ but I've seen a few big ones that are nice examples.
Similar threads
Users who are viewing this thread
Sponsored Vendors
View all →
