Dell,the history of look down rods.

[max finkelstein]

Dell settle back, this is going to take time and I will start from the beginning. In 1986 or thereabouts I was dowsing at night down on the beach front and lost my l shaped dowsing rod. I grabbed a small branch off a tree and stripped most off the foliage off, leaving a few points to give weight to the end of my new dowsing rod. which left the new rod dangling down towards my feet . It gave a better reception than my l shaped rod.

Within a few months I was using the first look down rod which was a simple L shaped rod composed of the usual 5-6 inches for the handle and a gap of 4-5 inches horizontal and the rest bent down at a 90 degree angle to bring it inside my bodies aura..

I couldn?t improve much on this first version which was about 100% stronger mentally till January 2004 when I thought of aluminum. The weight factor of bronze etc always foiled any improvement.
I ended up using about one and half packs of rods, (100 to a pack.) before I achieved that for me was a perfect balance with uncanny reception and maybe a 100 times stronger.

In February on a good solar flare day with an overhead moon for reflection I tested the new rod out on a buried bronze target at a depth of 3 feet. I could not detect the target until I was over it, and then it wouldn?t let go without difficulty.

I had invented a perfect foolproof mental dowsing rod that couldn?t make a mistake by pulling in, and over the next 18 months until the Solar flares phased out till next year I made incredible discoveries. Piece by piece many discoveries joined together to give me insight into thousands of Jesuit deposits here in Port Phillip Bay, the Australian coastline, all pacific areas and stretching across the USA and also ending up breaking the Jesuits
450 year old Burial code recently. You can probably now understand why I get a bit short re misinformation.

 

Amazon Forum Fav 👍

A History of Mining on the Kenai Peninsula, Alaska - Grab it through Amazon!

[max finkelstein]

Hi there. This is probably the only chance you will ever have of learning and experiencing the thrills of mental dowsing.
Please remember that we are in the final stages of the suns 11 year cycle of breathing. There has not been a flare strong enough to dowse off for most of this year( in conjunction with a moon) I think it is 6 months or more since I have dowsed. Somewhere on NOAA there will be reference to when the next cycle begins.
I definitely recall that when I first picked up a pair of dowsing rods it was high summer 1984 and the rods were almost talking to me.
that was exactly summer 22 years ago. Which means that sometime this summer, Xmas or fall to you onwards, the pattern of the suns flares and bubbling will commence. There will be days of bubbling when the strength is OK and be reliable for days in a row.

To the ones who will fail to be able to dowse , you can attribute it to the following. Dowsing in the sun without headgear to protect the Cerebellum above the ear on the opposite side of the head to the hand that you dowse Th from the suns dowsing destroying UV rays.

Dowsing without a moon of at least a third strength. Dowsing without being directly in line of sight of the moon.
Dowsing under a shadow means you are blocking off the moon. Dowsing in a building with a non conductive roof cladding ( tiles etc)
Dowsing in high grass, the foilage will suck out your dowsing power. And of course dowsing without Geomagnetic power supplied in 11 year cycles at times that are unpredictable. Apart from applying the above rules of which any one will wipe you out, go for your
life. I Didi learn something the other day. Quite valuable for map dowsing or photo dowsing

Maybe i wouldn't have been able to with an l rod because the power was so weak How do I know? because I tried. I recalled my own advice and decided to try out dowsing in my galvanised tin garden shed as I have been unsuccessful in my house which is tiled. The amount of dowsing power inside the shed which was directly in line with the moon was much stronger than out in the sun with my head protection on.

In other words there is still some weepage of UV rays with a broad rimmed hat on. You can now understand that without every bit of the above knowledge sceptics with their million dollar prizes for dowsing proof are safe.

You might ask what is the use of learning to dowse with all these hurdles to overcome. In a few minutes of strong dowsing you can learn more than in a lifetime of digging empty holes and you only need one hole that is not empty.

Back to that look down rod you are going to make and are wary of its mind draining power until you build up mental muscles equal to the task, I am a bit concerned about building a rod that is too light which can be rediculous. If in aluminium or similar metals ( lightweight) build a minimum of 10 rods 33 inches in length and break the power down until you are ready by crossing 3 or 4 or 5 of the look down wires with lightweight fuse wire which will make all rods in contact with each other just one..

I apologise to all the would be dowsers who have asked me for help via mail whom I have not answered individually.
The above contains all you will ever need to know,except maybe crawl before you can walk with a simple bronze l shaped dowsing rod.
I cannot help any of you any more.

 

[Noble Metal]

Yes; and I am ready to go, go, go, come on January...

And THANK You Max Very very much.

 

[max finkelstein]

Dell, the reason that you have never heard of "look down " down rods is that I invented them. I am an inventer by trade.