What's new

Different Idea

The Beep Goes On

Silver Member
🥇 Charter Member
Joined
Jan 11, 2006
Messages
3,716
Reaction score
1,504
Golden Thread
0
Location
Houston, TX
Detector(s) used
Deus II/HF2, Manticore, E-Trac, Excalibur II, V3i, Pro-Find 40, Vibra-Probe 585, TRX
Primary Interest:
Metal Detecting
Has anyone ever filled the handle of their scoop with construction foam? It's air and water tight...it would seal out pretty much everything. You would never have water accumulation in the handle and it might reduce corrosion and sand buildup too.

Any Thoughts?

HH!
TBGO
 
Upvote 0
drill a tiny hole for air to escape
maybe some oil down it then some CRACK FOAM sounds good
lay it down so it doesnt plug the hole right off
then maybe epoxy the hole
 
EDDE said:
drill a tiny hole for air to escape
maybe some oil down it then some CRACK FOAM sounds good
lay it down so it doesnt plug the hole right off
then maybe epoxy the hole

Yeah, I thought about the air hole...what kind of oil are you talking about EDDE? Epoxying the hole afterwards is a good idea.

HH!
TBGO
 
wd40 (water displacement) basically its heavy kerosene
 
Beep..... I'm going to get some two part expanding foam the next time I'm near a marine supply store .... I took a 3ft. piece of 1in. pvc and tried to fill it with a can of expanding foam from Home Depot ...was unable to fill the pvc pipe,the foam expanded before it reached the bottom....with 2 part expanding foam,you pour equal amounts from each can into a mixing cup,mix quickly and pour the liquid into your handle...foam expands and fills handle to the top...be prepared for sticker shock,expanding foam is not CHEAP...and I can only find quart size cans when 1/2 pint cans would fill several handles...if you can figure out how to fill your handle with construction foam, please let me know..Rdi
 
Very good point rdi. I had thought of this and the only thing I could think of was to attach a thin tube (about the same size as the one that comes with the can) and lower it to the bottom of the handle and fill the handle as you pull up the tube. The tube would have to be at least 40" long, of course.

This would also negate the need to drill an air hole.

HH!
TBGO
 
polyvinyl fish tank hose 8)
 
EDDE said:
polyvinyl fish tank hose 8)

I have a fish tank and have some extra tubing...and it fits perfectly. Thanks EDDE! I will give it a try tonight or tomorrow and let you know.

HH!
TBGO
 
It is apparrent that the operation has been successful. You will know if you put too much in because it will overflow the exits. I apparently did alright, although there was some slight excess after filling (better than not filled enough). When/if its overfilling, place/insert some screws into the holes to force the foam to expand where you want it to.

HH!
TBGO
hw_misc_11.jpg
 
Beep...... thats great.....I'll do my in the morning......three heads are better than one...thanks to all for working out the old full your handle trick.......rdi
 
Great idea for a scoop handle.

I know that folks do the same thing for fish lannding nets also. They claim if you foam the handle and drop the net out of the boat that it will float.
 
Hey Beep....I shot some spray undercoating on the inside and outside of my scoop. It waterseals it and makes it easier to grip in the Galveston surf. HH Gayle
 
rsc said:
Hey Beep....I shot some spray undercoating on the inside and outside of my scoop. It waterseals it and makes it easier to grip in the Galveston surf. HH Gayle

Do you mean like truck bed liner stuff...?

HH!
TBGO
 
rhino liner in a can y not ;)
 
Yes Comes in a big can @ WallyWorld. Does not add flotation, but does seal out the rust, and helps with the grip. HH Gayle
 
Hay ????? Why cant we just take off the end cap handel N fill just the end to stop the water from filing up the shaft??? N dont drill a air hole??? A HAAAA!!!!! Mick
 
Can you use the truck bedliner spray on your searchcoil?
 
alfie008 said:
Can you use the truck bedliner spray on your searchcoil?

I know most use epoxy on their coils, but I don't see why bedliner stuff wouldn't work, unless it had any metallic content.

HH!
TBGO
 

Users who are viewing this thread

Back
Top Bottom