I own and use a Ranger Tell Examiner TG..There are many devices that are simpler to use but the information that it will give you is worth the trouble. If you try to dowse with any of these devices you are in trouble. I think of anything else but what I am doing when using this device. Ellis mailed me his new Ranger Tell a few years ago. I played with it for a week. I had to learn all over again but it worked. They have answered my questions and sent me all the updates. I now have close to 100 elements that I can search for. That has opened up whole new adventure for me.Marking the location of the target is simple...Just enter a distance of 0.005 and it will be right under your foot...
In fact I did a little practice this week...Yes I did a lot of practice to learn how to pinpoint with the device...I like to dig small holes so it was important to me. It is also important to have a cheat sheet with you on each hunt...ArtHowever you do need to know how to use it and also need lots of practice, being the pinpointing of the exact area, the most tough part in my opinion.
Gee ...I use Graphite Powder on mine to make it swing faster....The swingy thingy is too swingy.
A few dabs of superglue in the swivel will fix the problem of ideomotor response noise.
The newer ones have different operating instructions...I just prefer to dig smaller holes....ArtSo is the Examiner TG different from the regular Examiner model? What factors make the pinpointing hard to do?
Hey Rafael...I don’t know what model you have..I have a T.G model...It has to be in the degree mode. I use it in feet mode...to change from meters to feet after you enter the freq hit the mode button and then the +/- button..This setting can change so I always check it with a sample with a cos setting of 1 foot. If it is still in the foot mode I do not reset it.
The original freq were Gold/353...Silver/377....Copper/411...Lead/434...Iron/512 follow by 1 times the freq times 2 equals...
RT recommends that you stand in one spot and sweep a full circle. I do not like to work that way. I prefer to walk a North-South or East-West line. I check the direction before I start...I never carry a compass with me....When searching for gold I never carry my GPS with me as it will interfere with my locator...Art
Art, you find these things with your unit.... including the dollar bill? TTCI own and use a Ranger Tell Examiner TG..There are many devices that are simpler to use but the information that it will give you is worth the trouble. If you try to dowse with any of these devices you are in trouble. I think of anything else but what I am doing when using this device. Ellis mailed me his new Ranger Tell a few years ago. I played with it for a week. I had to learn all over again but it worked. They have answered my questions and sent me all the updates. I now have close to 100 elements that I can search for. That has opened up whole new adventure for me.Marking the location of the target is simple...Just enter a distance of 0.005 and it will be right under your foot...
.Art
`
Yes I do..I have a long list of things I can locate....I have not used all the codes yet but I have no doubt they will work...A few years ago I always purchased my beer at one little store. I noticed that the new bills I got in change did not feel right..So I checked each one for a few weeks. 2/3 of them were fake. I talked to the local police and they found that the guy that owned 6 stores was passing fake dollars...He was getting rich one dollar at a time..~TerryC~
Art, you find these things with your unit.... including the dollar bill?