- Joined
- Sep 26, 2006
- Messages
- 576
- Reaction score
- 267
- Golden Thread
- 0
- Location
- Orlando Fl.
- Detector(s) used
- Excalibur 1000, Excal II, Vibra-Tector 740, Vibra-Quatic 320, Automax Precision V2, Cache Pro Elite
- Primary Interest:
- Beach & Shallow Water Hunting
Found silver and diamonds yesterday, will post as soon as I have pix.
Anything like this ever happen to you:
Was working the dry sand at Cocoa and for 4-5 minutes the Xcal went nuts with constant chatter as if it were in a field of aluminum trash. Was in discriminate, turned the unit off and on, adjusted settings, nothing stopped the crazy signals. Passed the coil over the aluminum scoop and got that reading on top of all the other noise. There were dark clouds near but saw no lightning and did not hear the usual lightning chirp. The batteries were fine and still have plenty of charge. Then it stopped, I worked another half hour and went back over the same area with no problems and it is still working fine today. I never experienced anything like this in 7 years with this machine. In the absence of any cause I can find I am inclined to blame NASA.
Tek
Anything like this ever happen to you:
Was working the dry sand at Cocoa and for 4-5 minutes the Xcal went nuts with constant chatter as if it were in a field of aluminum trash. Was in discriminate, turned the unit off and on, adjusted settings, nothing stopped the crazy signals. Passed the coil over the aluminum scoop and got that reading on top of all the other noise. There were dark clouds near but saw no lightning and did not hear the usual lightning chirp. The batteries were fine and still have plenty of charge. Then it stopped, I worked another half hour and went back over the same area with no problems and it is still working fine today. I never experienced anything like this in 7 years with this machine. In the absence of any cause I can find I am inclined to blame NASA.
Tek

Amazon Forum Fav 👍
Attachments
Last edited:
Upvote
0