CarsonChris
Sr. Member
- Feb 11, 2019
- 486
- 1,998
- 🏆 Honorable Mentions:
- 1
- Detector(s) used
- Equinox 800, AT Pro
- Primary Interest:
- All Treasure Hunting
Still working on learning the XPD2. What seems to work better hunting in square nail beds?
Full tones or pitch?
- Thread starter CarsonChris
- Start date
Rothman
Full Member
- Jun 30, 2015
- 105
- 227
- Detector(s) used
- Xp Deus, Garrett Infinium LS, Bounty Hunter LRP
- Primary Interest:
- All Treasure Hunting
If its anything like the original deus, full tones is based on the VDI (Higher VDI = higher pitch sound)and pitch is more of a proximity thing (closer the target is to the coil the higher the pitch)
Pitch has it's place and if I run it I usually use a bit of discrimination so that iron doesn't give a higher more desirable target tone. I personally would rather hear the conductivity vs proximity.
Pitch has it's place and if I run it I usually use a bit of discrimination so that iron doesn't give a higher more desirable target tone. I personally would rather hear the conductivity vs proximity.
Tedyoh
Bronze Member
- Apr 13, 2013
- 1,566
- 1,619
- Detector(s) used
- XP Deus, NOX 600, XP Deus II
- Primary Interest:
- All Treasure Hunting
I would run Pitch......full tones has been known to "down average" a good target (coin, VDI 90+) next to iron......I've also seen tests where pitch will separate better as well....I haven't run full tones in 5 plus years....that's just me though.
