Cut old rubber back and glue on a 3/4 pvc cap.. My hand thank me.
M mattidlewine Newbie Mar 19, 2013 1 3 Primary Interest: All Treasure Hunting Sep 17, 2013 #1 Cut old rubber back and glue on a 3/4 pvc cap.. My hand thank me. Amazon Forum Fav 👍 Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!
Cut old rubber back and glue on a 3/4 pvc cap.. My hand thank me. Amazon Forum Fav 👍 Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!
justdon Bronze Member Aug 6, 2013 1,819 347 Florida Detector(s) used Teknetics delta4000/Tesoro compadre/Garrett ace 250/Garrett propointer/Garrett at pro/Tesoro silver umax Primary Interest: Metal Detecting Sep 17, 2013 #2 Not bad.Pretty good idea.
the bone Full Member Jul 8, 2012 153 127 michigan Detector(s) used bounty hunter tracker IV Primary Interest: All Treasure Hunting Sep 18, 2013 #3 also you can get "bar ends" for a bicycle for pretty darn cheap on ebay and the work great.
Jcostin Full Member Aug 17, 2013 116 47 Primary Interest: All Treasure Hunting Sep 20, 2013 #4 Great idea!
dbach149 Jr. Member Aug 4, 2013 22 14 PA Detector(s) used Garrett AT Pro Oct 8, 2013 #5 I picked up a pair of BMX handle bar ends. Attachments image-3782453931.jpg 77.2 KB · Views: 156 image-764458442.jpg 74.1 KB · Views: 191
sask hunter Sr. Member Aug 26, 2013 413 111 yorkton saskatchewan Detector(s) used bounty hunter tro/bfo ace 250 teknetics 4000 atp pro minelab ctx 3030 Primary Interest: Metal Detecting Oct 18, 2013 #6 I pulled off my rubber and welded a washer on the end then put abit of silicone one the end and slid the rubber handle back down and after hours of use has not cut the end like my first one did Sent from my iPhone using TreasureNet
I pulled off my rubber and welded a washer on the end then put abit of silicone one the end and slid the rubber handle back down and after hours of use has not cut the end like my first one did Sent from my iPhone using TreasureNet