Curious The George
Hero Member
- Joined
- Sep 4, 2008
- Messages
- 655
- Reaction score
- 133
- Golden Thread
- 1
- Location
- East Coast
- 🥇 Banner finds
- 1
- Detector(s) used
- Metrotech
- Primary Interest:
- All Treasure Hunting
- #1
Thread Owner
GPS Map Doesn't Match
I have a Garmin Etrex Venture HC GPS. I use MapSource topo maps on it.
There is a place where an interstate highway's lanes cross each other. The north bound side crosses a bridge over the south bound side. This makes a very accurate "X" on the map.
When driving across that point in both directions with the GPS turned on the track is missing that X on the map by about 520 feet.
How do I get the map moved to match the actual location that the GPS says is the actual crossing point? I could see it being off by a few feet but a tenth of a mile is kind of too much.
I have a Garmin Etrex Venture HC GPS. I use MapSource topo maps on it.
There is a place where an interstate highway's lanes cross each other. The north bound side crosses a bridge over the south bound side. This makes a very accurate "X" on the map.
When driving across that point in both directions with the GPS turned on the track is missing that X on the map by about 520 feet.
How do I get the map moved to match the actual location that the GPS says is the actual crossing point? I could see it being off by a few feet but a tenth of a mile is kind of too much.