relicmeister
Bronze Member
- Joined
- Jul 26, 2012
- Messages
- 2,216
- Reaction score
- 2,151
- Golden Thread
- 0
- Location
- Poconos, Nw.NJ & Delaware Valley
- Detector(s) used
- XP Orx Deus II, 9” coil
- Primary Interest:
- Relic Hunting
- #1
Thread Owner
For my Orx and Deus lite I have 4 coils-
11” X35
9” hi frequency
9” X35
9” x 5.5” elliptical hi frequency
I’m sure it’s one of the 9” ones but which should I keep
And which is most redundant?
I’m thinking the 9” X35 is covered by 11” same frequency range
And I am mostly a relic hunter working in wooded sites often
Iron laden. I have better luck using higher frequencies than 4 kHz
Or 8 kHz and my Nox hits that range well and soon I hope the 10x5
Elliptical coil for it will come.
Anyone have other advice?
11” X35
9” hi frequency
9” X35
9” x 5.5” elliptical hi frequency
I’m sure it’s one of the 9” ones but which should I keep
And which is most redundant?
I’m thinking the 9” X35 is covered by 11” same frequency range
And I am mostly a relic hunter working in wooded sites often
Iron laden. I have better luck using higher frequencies than 4 kHz
Or 8 kHz and my Nox hits that range well and soon I hope the 10x5
Elliptical coil for it will come.
Anyone have other advice?