help required

desibaabu · Mar 8, 2013

hello everyone , we had bought a new gmr metal detector. we had a few confirmed locations, we started our scan and found that the gmr pinpointed at at least 7 locations. we dug a few and found absolutely nothing. we had to dig as good as 10 feet and after several failures we dumped that machine.

now the dealer is suggesting an Okm 5000 gold edition.

we are now somewhat unsure to invest any further in these machines.

can anyone suggest us to what can be the best machine to scan a exact 3d image of the area. we are completely sure that the gold is kept in a vessel. so if we get an image we can detect the area immediately.
we would also like to invite some professional if he has a good experience with a 3d machine.

regards,
VG

Terry Soloman · Mar 8, 2013

desibaabu said:
hello everyone , we had bought a new gmr metal detector. we had a few confirmed locations, we started our scan and found that the gmr pinpointed at at least 7 locations. we dug a few and found absolutely nothing. we had to dig as good as 10 feet and after several failures we dumped that machine.

now the dealer is suggesting an Okm 5000 gold edition.

we are now somewhat unsure to invest any further in these machines.

can anyone suggest us to what can be the best machine to scan a exact 3d image of the area. we are completely sure that the gold is kept in a vessel. so if we get an image we can detect the area immediately.
we would also like to invite some professional if he has a good experience with a 3d machine.

regards,
VG

Let me put this very gently. You were cheated once, and you are about to be played for a sucker AGAIN if you buy ANYTHING from OKM. I don't know where you are (sounds like Europe), but you need some serious schooling in metal detecting vs ground penetrating radar. You need either a Minelab GPX 5000, a two-box detector, or a back hoe depending on your situation. There is no machine that will do what you want.