Hey guys, I've been metal detecting for 20 years but yesterday I thought I'd give bottle digging a try. I found a very small bottle dump behind my family's house that has a lot of broken glass on the surface. I did find one dr kilmers swamp root remedy on the surface. Anyway, I started a trench about 8 or 10 inches deep and started working my way into it. Not a lot of glass but I was seeing the occasional broken cork top and I found 1 small whole bottle. I'm going to make a probe so that I know where to dig next time. I'd like to keep the bottle tops, so my question is, how can I dull the edges? Also if anyone would like to show me the ropes, I'm in dillon county South Carolina. LOL. Thanks and HH!
How to dull the edges?
- Thread starter johnash15
- Start date
surf
Silver Member
- Jan 10, 2013
- 2,832
- 1,458
- Detector(s) used
- seeing eye shovel
- Primary Interest:
- Other
Read posts 11-14 in this recent thread: http://www.treasurenet.com/forums/bottles-glass/397446-old-bottle-necks.html
- Thread starter
- #3
Oh dang. I guess I should try reading down a little first. LOL. Thanks for the info.
Top Member Reactions
-
1956 -
1091 -
1054 -
994 -
868 -
864 -
837 -
800 -
735 -
590 -
431 -
372 -
353 -
347 -
339 -
338 -
E
337
-
307 -
294 -
292
