🔎 UNIDENTIFIED I give up…

Blackfoot58

Gold Member
🥇 Charter Member
Joined
Jan 11, 2023
Messages
5,694
Reaction score
14,296
Golden Thread
0
Location
Iowa
Detector(s) used
Makro Simplex+
Primary Interest:
Relic Hunting
This blob of metal is 2-1/2 oz. I tried testing it with various methods available to me. It does NOT mark a white sheet of paper. It does darken when bleach is dropped on it, but most things get darker when wet. Very hard to scratch with a knife, but it can be done. Seems WAY heavier than aluminum slag. It is non-ferrous. I don’t believe it is a rock; if it is, it is almighty heavy. It was found near the surface of a farm dump. I’m very intrigued with it. Tried an ice cube test. The ice melts freaky fast. Vinegar had basically done nothing earlier.
 

Attachments

  • 720C7C02-D0B8-495D-8047-BBE2DD099391.webp
    720C7C02-D0B8-495D-8047-BBE2DD099391.webp
    355.1 KB · Views: 223
  • 3E9FAC3C-E290-494F-B1B4-BC69A85D1E4C.webp
    3E9FAC3C-E290-494F-B1B4-BC69A85D1E4C.webp
    287.6 KB · Views: 155
I think this may be another limestone-related item like the flint nodules, a hematite nodule.
 

Upvote 0
Upvote 0
Rub it with sandpaper, black if you have it. It should show reddish brown powder if hematite.
 

Upvote 0
It scratches a shiny silver.
I may take this to a jeweler or buy a silver test kit. I gotta know! Spend $15 to find out I have $3.99 in silver!! LOL At least I’ll know
 

Upvote 1
I may take this to a jeweler or buy a silver test kit. I gotta know! Spend $15 to find out I have $3.99 in silver!! LOL At least I’ll know
I just read the value of silver does go up. Maybe it with be worth a reasonably higher amount.
 

Last edited:
Upvote 0
I may take this to a jeweler or buy a silver test kit. I gotta know! Spend $15 to find out I have $3.99 in silver!! LOL At least I’ll know
I think most recycling/scrap metal places will test it for you check around your area
 

Upvote 1
What about a melted Aluminum can ?
 

Upvote 1
lead from iron pipes, it was used to seal the joints.. that is how plumbing was done before plastic pipes
 

  • Like
Reactions: ARC
Upvote 1
Upvote 0
WELL HOW much does it weigh. Then weigh a couple empty cans like a 12 ounce and 16 ounce and 20 ounce
As I stated originally, 2-1/2 ounces. It is extremely hard to scratch.
 

Upvote 0
It's kind of an ugly looking thing.
Do a density test.
Simple enough to achieve.
Shiny and hard could be a bunch of things.
Melted Zinc die-cast is a common thing also.
Hit a spot with the file or grinder. Then put vinegar on the spot.
Bubbles 🫧 fizzles then it's Zinc. Nothing then go to aluminum cast idea.
 

Upvote 1
As I stated originally, 2-1/2 ounces. It is extremely hard to scratch.
Get three empty aluminum cans 12 oz 16 oz and 20 oz weigh them and see that they weigh
you don't have to melt them to weigh them
 

Upvote 1
Get three empty aluminum cans 12 oz 16 oz and 20 oz weigh them and see that they weigh
you don't have to melt them to weigh them
Gare there's a flaw in the 3 can (12oz)weigh solution as it would take 4.757 cans to weigh the 2.5 oz.

An average aluminium can (without its contents, of course) weighed 16.55 grams in 1992. By 2001 the aluminium can weighed about 14.9 grams. Aluminium beverage cans come in different shapes and sizes.
 

Upvote 0
Get three empty aluminum cans 12 oz 16 oz and 20 oz weigh them and see that they weigh
you don't have to melt them to weigh them
3 empty 20 oz cans weighed 1-5/8 oz.
 

Upvote 1
Well that can;t be it then :( Thanks for checking
 

Upvote 0

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top Bottom