What's new

Intricate Machined Threaded Old Brass Whatsit?

Kurios1

Silver Member
Joined
Feb 25, 2017
Messages
3,773
Reaction score
7,384
Golden Thread
0
Location
FEMA REGION 5 North Central Illinois
Detector(s) used
Nokta Impact Whites DFX 300 & M6 Matrix, Minelab Explorer II (2), Makro Red Racer & Racer 2, Garrett AT Pro.
Primary Interest:
All Treasure Hunting
Howdy Folks. I dug a strange little brass item yesterday. Actually two of them in the pictures. One is intricately machined and threaded. The other appears hollow and filled with some old wood. No idea what either could be designed for. The threaded part is 1 1/2 inches long. The hollow piece is 1 3/4 inches long. Any ideas please chime in. Thanks for your assistance.

Windy Cold on the Hill Hunt 001.webpWindy Cold on the Hill Hunt 006.webpWindy Cold on the Hill Hunt 011.webpWindy Cold on the Hill Hunt 007.webp
 
Impressive ID, Creskol!
(And as a gun owner, I'm certainly aware of shoving brass, cloth and solvents down a gun/rifle barrel to clean it - but this would have stumped me for sure!!) :thumbsup:
 
Upvote 0
creskol great ID

cool find
info @ site
Made from solid brass and patterned after those found in best English gun cases dating from 1800 through 1940.
Absolutely indistinguishable from the originals
 
Upvote 0
Wild! I don't recall ever seeing a cleaning jag like that (but then I haven't cleaned many original fine English guns).

Your other piece looks like the tip of a wood cleaning rod/loading rammer that would be carried under the barrel(s) of a muzzleloader. I even see what appears to be the head of the pin that would have held it to the wood dowel.
 
Upvote 0
Upvote 0
Wild! I don't recall ever seeing a cleaning jag like that (but then I haven't cleaned many original fine English guns).

Your other piece looks like the tip of a wood cleaning rod/loading rammer that would be carried under the barrel(s) of a muzzleloader. I even see what appears to be the head of the pin that would have held it to the wood dowel.

Thanks for the suggestion on the other brass piece with the three rings and wood inside. That really seems to make sense to me. I will do additional research of such rods to see if I can spot a match or close comparison. :icon_thumright:
 
Upvote 0
WOO HOO! Thanks for the dead on ID with pictures!!! Sweet! Pretty darn cool find. I love it. Now to find the old British custom built rifle.:headbang:

That is a really neat find. :icon_thumleft:
 
Upvote 0
That is a really neat find. :icon_thumleft:

It never ceases to amaze me just what strange artifacts can pop up in the least likely locations. Again, thanks for the link, ID, and within' mere minutes of me posting this in the a.m. before work today. Well Done!:icon_salut:
 
Upvote 0

Users who are viewing this thread

Back
Top Bottom