Just bought a used Cointrax Baron.....

[Big Red]

It came with a Deep Search module, so I am wondering if anyone knows if you can use this deep search module with the Cointrax? This cointrax has the first chip in it, the 1.0, so no built in deep search, like the Cointrax II has? I know it will work on the Pro Hunter module, but unsure if it will work on the older (Kellyco?) Cointrax? It will zap up to 3 times the power to the coil, so sure would like to know if I can use it? Any Treasure Baron/Discovery Electronics guys out there still? Thanks

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[Keppy]

I never had one but was the Coin Trax made by Bounty Hunter or Teknetics ? But they are a nice looking detector...

 

[Phantasman]

I think Discovery Electronics was a spin off of some Whites personnel in 1991. Both are in Sweet Home, OR.

 

[Keppy]

But they were made by ..Discovery electronics... who ever that was... so you say that was whites ... But with some called Baron that would be bounty hunter could be my mind is mixed up tonight..

 

[Phantasman]

George Payne designed the Baron series. He also was the father of Bounty Hunter. Discovery Electronics went out of business, so getting their detectors fixed are almost futile.

Here is a beneficial site for Baron/Millennium/CoinTrax users. Discovery Treasure Baron Page

 

[Joe(TX)]

George Payne designed the Baron series. He also was the father of Bounty Hunter. Discovery Electronics went out of business, so getting their detectors fixed are almost futile.

Here is a beneficial site for Baron/Millennium/CoinTrax users. Discovery Treasure Baron Page

Not futile!! Keith Wills at East Texas Metal Detectors specializes in metal detector sales, service, and repair can fix most vintage metal detectors!

 

[dgerst]

Just got mine back from Mr. Wills. He did a fine job quickly. Still the deepest machine I've used. Here's how it air tests against my DFX on gold.
https://youtu.be/Pl0GpYHugXw

 

[Timecop67]

I've still got my Treasure Baron (and Gold Trax module) with less than 10 hours on it....decided it was time to use it after leaving the hobby for awhile. Anyone know of any good replacement coils that will work with it? I've got a Detech dealer that is looking for something that will work on the 12.5khz frequency. Tesoro Mohave works at 12khz and it may be 5 pin also. Previously had a Teknetics 8500 unit, Minelab sovereign, Tesoro Bandito, Tesoro Toltec 100, but have liked the George Payne units the best.

 

[Az Digger]

I got the gold trax, been looking for cointrax