Mercury in the sluicebox?

[Quinc]

Anyone have any ideas how the old timers used mercury in there sluice boxes? Been finding a lot of it lately and curious how they did it and why they lost so much of it.

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[southfork]

Anyone have any ideas how the old timers used mercury in there sluice boxes? Been finding a lot of it lately and curious how they did it and why they lost so much of it.

Sometimes a slick plate made of copper was rubbed with mercury or a catch filled with mercury. But running too fast gold along with the mercury ended up back where it came from. Easy to clean with a little Nitric but stay upwind.

 

[russau]

Yep I forgot about that way and also the men that were using stamp mills also used the Mercury covered Copper plates to capture fine gold.

 

[ConceptualizedNetherlandr]

If Mercury is showing up in your sluice or pan it might contain gold.

​

 

[Quinc]

If Mercury is showing up in your sluice or pan it might contain gold.

​

It does for sure. I save it all in a separate jar and burn it with a torch at the end of the year. *Up wind.

 

[southfork]

Yep I forgot about that way and also the men that were using stamp mills also used the Mercury covered Copper plates to capture fine gold.

Some of the big bucket line dredges used mercury plates also here in California. All of the methods had losses of mercury covered gold.

 

[N-Lionberger]

Some old timers would fill riffles with mercury. I have a book somewhere that describes the practice.

 

[russau]

I've always tried to avoid using Mercury ! There's just to many possibility's of having a ****up on my part and the results that follow ! I hope everyone has a very happy Thanksgiving with their family !

 

[Reed Lukens]

The merc was just poured into the sluices usually, so it washed out in floods. You have to charge mercury in order to get it to stick to the copper plates. Pretty much everything you will ever need to know on mercury & hydraulic mining is in the series below >

 

[russau]

Thankyou Reed ! That was a good video !!

 

[N-Lionberger]

The merc was just poured into the sluices usually, so it washed out in floods. You have to charge mercury in order to get it to stick to the copper plates. Pretty much everything you will ever need to know on mercury & hydraulic mining is in the series below >

Exactly, my literature talks about topping off the mercury as it gets lost.

 

[Goldwasher]

they used to pour it into their riffles .Even had mercury traps in the sluice so like a slump full of it. They only used copper plates on stamp mills and finishing tables. so with high sudden flow or disturbance or mercury would come out of the end of the sluice.

 

[N-Lionberger]

pretty crazy stuff.

 

[Reed Lukens]

I learned with copper pans back in the day...