Silver_Sn1per
Full Member
- May 14, 2012
- 206
- 103
- Detector(s) used
-
XP Deus, CTX3030, Etrac, Safari, AT-Pro, Whites Blue & Grey
(American History Metal Detecting)
- Primary Interest:
- Relic Hunting
Milspec Lesche Sheath™
Made from high quality military spec webing, the Milspec Lesche Sheath is the only sheath you will ever have to buy for your digging tool! Simply slides on to your belt and your good to go! Equiped with a drain hole located on the bottom so cleaning is easy! Two to choose from... One with a pocket that fits a pack of smokes perfectly, or spare batteries, gloves, etc. Or you can purchase the same sheath for your digging tool without a pouch. The Milspec Lesche Sheath is made by hand by a US ARMY SPECIAL FORCES Veteran. Shipping only within the United States.
Www.milspecmetaldetecting.com
Milspec Booty Bag™
The Milspec Booty Bag™ is the ultimate treasure bag, or "Booty Bag™!" One large compartment for your relics and trash, and two other compartments for your treasure/Booty! The Milspec Booty Bag™ is made up of Milspec material that will hold up in the toughest conditions. The bag also has built in pen holders as well as mesh bottom compartments so you dont have do worry about bringing home all of that unwanted dirt or sand with you as well! Cleaning is a breeze because the bag does not retain water. The Milspec Booty Bag™ is hand made by a United States Army Special Forces Veterean!
Milspec Elements Cover
This Milspec Elements cover is hand made by a U.S. Army Special Forces Veteran! All of the materials used are the exact same materials that are used to create magazine pouches, Chest Rigs, flak vests, etc... There is a strip of loop velcro along the back side of the cover so you can attach a name tape or whatever else you decide to attach to the cover. The Milspec Elements cover can be made from many different camo designs and or solid colors. This specific cover is made to fit the Minelab ETRAC, EXPLORER, and the SAFARI! A cover for the Garrett AT PRO will be coming soon! Shipping only within the UNITED STATES.
Milspec Elements AT PRO Cover
This Milspec Elements AT PRO cover is hand made by a U.S. Army Special Forces Veteran! All of the materials used are the exact same materials that are used to create magazine pouches, Chest Rigs, flak vests, etc... There is a strip of loop velcro along the back side of the cover so you can attach a name tape or whatever else you decide to attach to the cover. The Milspec Elements cover can be made from many different camo designs and or solid colors.
Made from high quality military spec webing, the Milspec Lesche Sheath is the only sheath you will ever have to buy for your digging tool! Simply slides on to your belt and your good to go! Equiped with a drain hole located on the bottom so cleaning is easy! Two to choose from... One with a pocket that fits a pack of smokes perfectly, or spare batteries, gloves, etc. Or you can purchase the same sheath for your digging tool without a pouch. The Milspec Lesche Sheath is made by hand by a US ARMY SPECIAL FORCES Veteran. Shipping only within the United States.
Www.milspecmetaldetecting.com
Milspec Booty Bag™
The Milspec Booty Bag™ is the ultimate treasure bag, or "Booty Bag™!" One large compartment for your relics and trash, and two other compartments for your treasure/Booty! The Milspec Booty Bag™ is made up of Milspec material that will hold up in the toughest conditions. The bag also has built in pen holders as well as mesh bottom compartments so you dont have do worry about bringing home all of that unwanted dirt or sand with you as well! Cleaning is a breeze because the bag does not retain water. The Milspec Booty Bag™ is hand made by a United States Army Special Forces Veterean!
Milspec Elements Cover
This Milspec Elements cover is hand made by a U.S. Army Special Forces Veteran! All of the materials used are the exact same materials that are used to create magazine pouches, Chest Rigs, flak vests, etc... There is a strip of loop velcro along the back side of the cover so you can attach a name tape or whatever else you decide to attach to the cover. The Milspec Elements cover can be made from many different camo designs and or solid colors. This specific cover is made to fit the Minelab ETRAC, EXPLORER, and the SAFARI! A cover for the Garrett AT PRO will be coming soon! Shipping only within the UNITED STATES.
Milspec Elements AT PRO Cover
This Milspec Elements AT PRO cover is hand made by a U.S. Army Special Forces Veteran! All of the materials used are the exact same materials that are used to create magazine pouches, Chest Rigs, flak vests, etc... There is a strip of loop velcro along the back side of the cover so you can attach a name tape or whatever else you decide to attach to the cover. The Milspec Elements cover can be made from many different camo designs and or solid colors.
Amazon Forum Fav đź‘Ť
Last edited:
