What's new

My first large cent... Toasted!

Auriemma

Hero Member
Joined
Jul 24, 2014
Messages
526
Reaction score
483
Golden Thread
0
Location
SE PA
Detector(s) used
Minelab: Sov XS; Sov XS2 Pro ; XS2a Pro ; E-TRAC; Profind 25, Garrett PP AT
Primary Interest:
All Treasure Hunting
I was at a hunt run by George, with a number of MDers from SE PA. Found lots of stuff, re enactor buttons, blanks, scrap, clad... But the one that got my attention was this a large coin that was really toasted. Not sure what it is. Some thought a King George, but no real definitive answer. Any ideas from the other experts here?

Thanks again George... Great hunt! Nice meeting the rest of you guys, and lady.

I should also add... Found with my ATP (83) at about 6-7 inches.
 

Attachments

  • image-1416034583.webp
    image-1416034583.webp
    72.3 KB · Views: 178
  • image-3778759181.webp
    image-3778759181.webp
    95.2 KB · Views: 144
  • image-135229170.webp
    image-135229170.webp
    75.6 KB · Views: 143
Last edited:
Upvote 14
looks like a superb example of something I would love to find, no matter what kind of coin it is, just to find something that old is really cool, hope you can get it identified, sounds like a great hunt with a great bunch of guys
 
Looks like it may be a George 3. Can you measure it in mm and let me know(if you have calipers that is) sounds like a fun hunt
 
Thanks dirtlooter! Ahab... it measures 1.125 in dia x .077 thick give or take .005. I am not a coin expert by any means, but it looks like a left Facing Victoria.
 
Last edited:
Its an 1806 or 1807 King George III Half Penny....found one myself a couple years back... Congrats!
 
Thanks dirtlooter!

Ahab... it measures 1.125 in dia x .077 thick give or take .005.

I am not a coin expert by any means, but it looks like a left facing Britannia.

Hmmm bigger than I thought you were going to say. I once found a kg3 that looked very similar but was smaller. Let me do some searching and get back to you in the a.m. Bud
 
Thanks Ahab. It does bare a resemblance to a 1806 as Nooberz said. I'd appreciate anything you could find out.
 
Cool find! Congrats!
 
Thanks Ahab. It does bare a resemblance to a 1806 as Nooberz said. I'd appreciate anything you could find out.
Yeah I thought for sure that it was an 06-07 half penny but it's too big. The diameter of those years is 29mm. The diameter of the 1799 is 30mm and yours is about 31.75. But it sure seems like the right busy size to be the 06-07. Ok headed out to find some treasure. I will get back to ya tonight
 
They are fun to find, sometimes they drive me nuts trying to figure out exactly what date and type. Still cool knowing it's a 200 year old coin.

Nice hunting with ya
Brad
 
Ok, Math check... 1.125 x 25.4 = 28.58mm
 
Grats on that first LC !!
 
Toasted, like so many others.
 
Toasted or not, always fun to find a big old coin. :icon_thumright:
 
Your welcome Joe..
And your coin is a George 111.half penny 1800's.
I found 3 there just like it.. (toasted that is)
On them coins the date is under the head.
George
 
Thanks... A couple of better pics....

Thanks George! 8 hours swinging... A very good time.
 

Attachments

  • image-158696795.webp
    image-158696795.webp
    155.4 KB · Views: 87
  • image-4196048336.webp
    image-4196048336.webp
    123.3 KB · Views: 108
Last edited:
Ha sorry bud I was putting my calipers on 1.25 inches. Idiot lol
 
Nice LC find congrats!

Welcome to the toasted LC club! My first LC is toasted and no readable date, unless your using a lot of wishful thinking!
I think yours is older than mine.
 

Users who are viewing this thread

Latest Discussions

Back
Top Bottom