extractor
Silver Member
- Joined
- Sep 27, 2007
- Messages
- 2,941
- Reaction score
- 54
- Golden Thread
- 0
- Location
- Sal Sagev Adaven
- Detector(s) used
- E-TRAC,,,, SOVEREIGN GT,,,, GP 3500,,,,
GB PRO.
- Primary Interest:
- Metal Detecting
- #1
Thread Owner
I do a fair amount of metal detecting out in the desert. It's important to get the coil as close to the ground for a strong signal. I have built a bunch of different diggers over the last few years. This one is the latest and works the best. I took a long handle square shovel and a pry bar , cut them apart and welded them back together to build it.
It has a 47 lbs pull magnet.
The magnet is protected by a 2'' square ring . The sides keep the dirt on the blade as I dig deeper,
I'm leaving up to you guys to give it a name.
It has a 47 lbs pull magnet.
The magnet is protected by a 2'' square ring . The sides keep the dirt on the blade as I dig deeper,
I'm leaving up to you guys to give it a name.