- Joined
- Oct 6, 2009
- Messages
- 1,212
- Reaction score
- 2
- Golden Thread
- 0
- Location
- Florida- Somewhere in the middle
- Detector(s) used
- MXT 300/Excal II/Surf Dual Field
- Primary Interest:
- All Treasure Hunting
- #1
Thread Owner
I have 3 1968 Mexico Olympics commemorative coins and need help on one of them. Two are silver and one is gold colored. I spent hours trying to ascertain why one was gold, yet marked with the .720 mark the same as the other two, and found nothing. No info on whether some were plated or clad in gold, or minted in solid gold.
Here is my dilemma. I purchased a gold tester (electronic) awhile back after being fooled by a "gold" necklace I found, and it seems to work properly after testing many gold/non-gold items. I even found that a ring I had bought for my wife years back, although stamped 14k, doesnt even test positive for gold plate.
I tested the coin, and it tests as solid 22K gold. It leaves a strong, solid line on the tester, whereas gold plated stuff leaves a broken line that soon peters out.. I even made several lines using the same spot on the coin to see if it petered out eventually, as I think heavy gold plate would, but the line stays solid. As far as I know, the only way to really know is to cut the coin, but that would then ruin the coin, so I have ruled that out. I also dont want to sell a coin as gold clad and then it turned out to be solid.
Is gold clad thick enough to test as solid gold?
I weighed all three coins on my scale without moving the scale so to ensure consistency, and the following weights were observed..
Silver coin 1- 22.56 g
Silver coin 2- 22.37 g
"Gold" coin - 22.60 g
I would think that a solid gold coin would weigh considerably more than the same coin in silver, and as you can see, the difference is there, but not a lot. That makes me think that the coin is gold clad over silver. That would account for it being slightly heavier.
As always, I know that people on this board know their stuff, and I will get an answer.
Thanks in advance, and HH to all!
SS
Here is my dilemma. I purchased a gold tester (electronic) awhile back after being fooled by a "gold" necklace I found, and it seems to work properly after testing many gold/non-gold items. I even found that a ring I had bought for my wife years back, although stamped 14k, doesnt even test positive for gold plate.
I tested the coin, and it tests as solid 22K gold. It leaves a strong, solid line on the tester, whereas gold plated stuff leaves a broken line that soon peters out.. I even made several lines using the same spot on the coin to see if it petered out eventually, as I think heavy gold plate would, but the line stays solid. As far as I know, the only way to really know is to cut the coin, but that would then ruin the coin, so I have ruled that out. I also dont want to sell a coin as gold clad and then it turned out to be solid.
Is gold clad thick enough to test as solid gold?
I weighed all three coins on my scale without moving the scale so to ensure consistency, and the following weights were observed..
Silver coin 1- 22.56 g
Silver coin 2- 22.37 g
"Gold" coin - 22.60 g
I would think that a solid gold coin would weigh considerably more than the same coin in silver, and as you can see, the difference is there, but not a lot. That makes me think that the coin is gold clad over silver. That would account for it being slightly heavier.
As always, I know that people on this board know their stuff, and I will get an answer.
Thanks in advance, and HH to all!
SS