New Ring and Old Pocket Knife

AusTexDude

Hero Member
Joined
Aug 12, 2013
Messages
574
Reaction score
1,436
Golden Thread
0
Detector(s) used
Nokta Legend, Garrett AT MAX
Primary Interest:
All Treasure Hunting
Found this ring when I first started was thinking it might be my first 3 ring day but it was really a 3 ring circus of pull tabs.

20241218_172931.webp


20241218_173004.webp
 

Upvote 12
Cool ring.
The Mask
 

Ah yes, those pesky tabs! :BangHead:
You should see the way I detect the swimming hole. I get down on my knees, dig 5 or 6 targets, move up a foot, dig another 5 targets, I spend half the time detecting from my knees. Actually thought of taking one of the shafts out of the detector. So many targets, pennies, nickels, dimes, quarters, pull tabs (both kinds), foils, brass screws, melted aluminum, fishing weights, and of course rings. I think I'm up to 21 from this park and I think there is at least 100 or more left.

Lucky for me most targets are only 2 inches deep, most not father than 4
 

You should see the way I detect the swimming hole. I get down on my knees, dig 5 or 6 targets, move up a foot, dig another 5 targets, I spend half the time detecting from my knees. Actually thought of taking one of the shafts out of the detector. So many targets, pennies, nickels, dimes, quarters, pull tabs (both kinds), foils, brass screws, melted aluminum, fishing weights, and of course rings. I think I'm up to 21 from this park and I think there is at least 100 or more left.

Lucky for me most targets are only 2 inches deep, most not father than 4
Certain detectors the space between the controls and coil is limited because of interference between each other.
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom