Newbie questions.

[steven252000]

Hello I just got my detector today (Multi Kruzer) and have just a couple set up questions. First does the machine come with an extra set of the plastic bolts that attach the coil? Mine seemingly did. Second when attaching the cord from the coil to the machine does the screw part screw all the way in or is do you just screw it till tight with some screw threads still showing. I dont wanna screw it too hard obviously but wanna make sure it's right so that if I take it in water it doesn't get water in machine. Thanks.

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[vpnavy]

I noticed that this was your very first post - so, Welcome Aboard Steven! Take a look at Sub-Forums: Georgia for information (i.e., clubs, etc.) directly related to your state.

 

[Rookster]

Welcome to Tnet. When attaching the coil just make the screw snug .Don't overtighten.

 

[sws33]

There are definitely threads visible after making attachments on my Kruser, and yes, you will receive an extra set of coil mounting hardware.

 

[steven252000]

Thanks for the replies.....I mainly wanted to make sure about the threads being visible to be on the safe side when I get it in or near water areas......It would have devastated me to get it in water and find out that water got inside and ruined it. Now to read and learn the settings....thanks again.