HuntinDog
Bronze Member
Ok first off it's 6" long and 1" square with the "mushroom" end 1 5/16" by 1".
The hole on the end is 1/2" and 2 5/16" deep.
The broken protruding attachment is counter sunk on one side and threaded on the other.
There are two threaded holes in that flat base.
I hope the text on my pictures show.
Found this and thought it had the feeling of being a gun part or it could be just a piece of farm equipment.
thought I would do a bit of cleaning and see if there was anything stamped into it.
the best I can tell...
U ? (S)
SNO
(REH)
MIDL? (E)
CONN
1840
So... Anyone got any ideas
Thanks for the help
The hole on the end is 1/2" and 2 5/16" deep.
The broken protruding attachment is counter sunk on one side and threaded on the other.
There are two threaded holes in that flat base.
I hope the text on my pictures show.
Found this and thought it had the feeling of being a gun part or it could be just a piece of farm equipment.
thought I would do a bit of cleaning and see if there was anything stamped into it.
the best I can tell...
U ? (S)
SNO

MIDL? (E)
CONN
1840
So... Anyone got any ideas

Thanks for the help