john_smith007
Newbie
- May 6, 2024
- 2
- 3
PulseI Induction Vs VLF
Feature | Pulse Induction (PI) | Very Low Frequency (VLF) |
Depth Penetration | Superior, reaching depths of up to 6 meters / 20 feet or more | Moderate, effective for detecting shallow targets up to 2-3 meters/ 6.5-10 feet |
Target Discrimination | Variable, some models offer advanced discrimination capabilities | Generally good, able to distinguish between different types of metals |
Ground Conditions | Less sensitive to mineralized soil, suitable for a wider range of environments | More susceptible to interference from mineralized soil |
Cost | Generally more expensive than VLF detectors | More affordable and widely available |
What Should You Choose?
So, which one should you choose? Well, it depends on where you plan to hunt and what you’re looking for.If you’re heading to the beach or areas with high mineralization, I suggest going for a PI detector. They’ll go deeper and won’t get thrown off by the ground conditions.
But, if you’re planning to hunt in parks, old houses, or places where you might find a lot of trash, I recommend a VLF detector. They’ll help you sort through the junk and find the treasures.
Regardless of which type you choose, remember to always respect the environment and follow local laws when metal detecting.
And, of course, patience is key! Metal detecting is a bit like fishing – some days you catch the big one, and other days, you just enjoy being outdoors.
Amazon Forum Fav đź‘Ť
Last edited by a moderator:
Upvote
1