Sand scoop homemade

black_cat

Greenie
Joined
Sep 21, 2013
Messages
14
Reaction score
5
Golden Thread
0
Detector(s) used
Fisher Cz6a.
Excalibur 1000
Primary Interest:
Beach & Shallow Water Hunting
Hi all!

My (Sand Scoop) homemade that the dry sand works great:thumbsup:

111-300x225.webp

222-300x225.webp

333-300x225.webp

4444444-300x225.webp

san1-300x225.webp

san2-300x225.webp

san3-300x225.webp

san4-300x225.webp

 

Upvote 0
I have made a number of scoops and after 5 or more years they have never failed. 2 suggestions that might help you... I use extra long tie wraps to take the stress of your the point where your pole joins your scoop. Go from the top front of your scoop to about 4 or 5 inches up your pole. On mine I can pull has hard as I want and all the stress is on the tie wraps, not on the joint. Second tip is to drill holes the way you have them in the front and sides. As you head to the rear of the scoop drill smaller holes to the point where there is a sieve at the catch basin in the back of your scoop. This area is for ear rings and other fine pieces. I don't know how many times I have tried to find an ear ring that keeps falling through those large opening. Hope this will help you.
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom