Sovereign coil connectors...

[GibH]

Anyone know where I can buy one? I need one for a 10" BBS coil. The coil works fine, but squawks like hell when the wire is moved even the slightest. The female sockets look to be spread out in the connector.

 

[Jeff In North Georgia]

Maybe at Radio Shack. Microphone connectors.

Jeff

 

[GibH]

Sweet. Thanks Jeff!

 

[stasys]

GibH one different that original better quality and gold plated, simple connectors works ok, but they are far away from the quality, one way to use original gold plated pins in the simple one. take off from both connectors pins and see what is the different. I pass this problem with some pain, some cheap are very bad, with loose pins, expensive gold plated like original never saw where to get. so I use cheap but not tragic. good luck in founding normal quality, but if you will get somewhere like original let me know where. thanks Stasys

 

[Ronfrommichigan]

Most of the time one of the wires in the pin will come loose.Make sure you use a low watt soldering iron with fine solder.They have a you tube site on how to solder pins.LOL a while back I bought a lot of 18 Sovereign coils that needed connectors.After I pinned a half dozen connectors it gets easier.I never found six pin connectors at Radio Shack had to buy them from Ebay the supplier was in Hong Kong.Good Luck Ron

 

[OBN]

http://www.gijoesradioelectronics.com/scripts/prodView.asp?idproduct=729