✅ SOLVED Trigger guard ID needed

[Tigerdude]

Trigger guard. Looks like brass

 

Amazon Forum Fav 👍

A History of Mining on the Kenai Peninsula, Alaska - Grab it through Amazon!

[Winchester416]

Looks like a colt...

 

[Blackfoot58]

Cool find! Congratulations

 

[Injunbro]

Looks similar to Marlin .22 rifle trigger.

 

[Almy]

If brass, that narrows it down. Most machined trigger guard assemblies are steel. As Winchester suggested, some early Colt parts were brass.

 

[dozer dan]

If brass, that narrows it down. Most machined trigger guard assemblies are steel. As Winchester suggested, some early Colt parts were brass.

As were Griswold & Gunnison.

 

[Tigerdude]

As were Griswold & Gunnison.

Based on y’all’s info , I started looking for brass tigger guard. Take a look at 1858 Remington pietta revolver. What do y’all think

 

[Charlie P. (NY)]

I agree with the Colt 1858. Even if it is steel. London made them in steel under contract.

 

[BAW]

It is not from a Colt. Colt brass triggerguards were made integral with the front grip strap. This can be seen by googling "Colt 1860 schematic" (or 1851, 1849 etc. It looks similar to a Remington 1858 or 1863 guard, but still not exactly the same. It may be from a Remington of another model or from any of the many lesser-known revolvers made during the era of the Civil War.

Trigger guard. Looks like brass

 

[Charlie P. (NY)]

Look at theRemington 1858.

 

[Tigerdude]

View attachment 2074042Look at theRemington 1858.

That looks like it. there is a protrusion or teat at the rear of my guard that looks like it’s depicted on the diagram

 

[Tigerdude]

That looks like it. there is a protrusion or teat at the rear of my guard that looks like it’s depicted on the diagram

Ok , I'm gonna call it. Trigger guard from Battle of Plains Store(prelude to the siege of Port Hudson). Remington revolver trigger guard.

 

[BuckleBoy]

View attachment 2074042Look at theRemington 1858.

This is the correct ID. M1858 Remington revolver. I’ve dug 4-5 of these trigger guards over the years.

 

[Tigerdude]

This is the correct ID. M1858 Remington revolver. I’ve dug 4-5 of these trigger guards over the years.

thanks for the confirmation

 

[BuckleBoy]

thanks for the confirmation

They were hugely popular weapons in Louisiana

 

[Tigerdude]

They were hugely popular weapons in Louisiana

.36 or .44 ?

 

[BuckleBoy]

.36 or .44 ?

The ones I recovered are all .44