gold fish
Bronze Member
- #1
Thread Owner
I am not getting much depth out of my cortez(6" at best).I have been coinshooting the local fairgrounds, I am finding alot of clad, but when I turn over the plug to check for the coin it won't beep it unless there's less than a couple inches or so of dirt(from the bottom of the plug). I have hit a bunch of clad, but nothing deeper than 2-3". The disc. is set at "foil", I have the notch switch set to narrow, the sensitivity is between 7-8. I keep the "ground balance" in the half-way position, as I am just shooting coins in disc mode(it's supposed to auto balance in disc).The threshhold is at the start of the orange "bar". I have brand new coppertops in it(yes alkalines), but I am still not getting deep hits.
There is the chance that there's just nothing in this area, but the grounds date back to the late 1800's, and with this much clad, they CAN"T be thoroughly searched. Any advice is welcome, thanx in advance.
There is the chance that there's just nothing in this area, but the grounds date back to the late 1800's, and with this much clad, they CAN"T be thoroughly searched. Any advice is welcome, thanx in advance.