✅ SOLVED whats with the rounded ends

Status
Not open for further replies.

outlawatheart

Hero Member
Joined
Jan 19, 2011
Messages
811
Reaction score
874
Golden Thread
0
Location
Hamilton County IL.
Detector(s) used
White's DFX Spectrum
DSC09552.webpare these reworked?? into??
I have a couple a dozen of this shape and have always wondered what they were.
 
Upvote 0
are the backs unifaced with a curve? if so thumb scrapers. nice.
 
If not uni-face thumb scrapers, they are probably pre-forms. Nice ones whatever they are. I like them a lot.
 
Hafted Knives
 
Gators right!! But the big grey one looks like a reworked piece. Need a pic to be sure. Nice group btw!!! HH
 
LOL!!!!!
 
Last edited:
The guy laughs out loud .. Must be about the fact that he believes the fine pressure flaking was done on preforms.
Some people are funny I agree
 
I found them in that shape and worked. Not sure sometimes if they werent used as a dart point cause they usually have a tip on the other end. But most likely a scraper or knife. You got some good looking ones.
 
You're right rock some forms of dart points are very similar a close look at sharpening and use wear can help determine the difference.
 
Speaking of use wear as an indicator, glad you mentioned it.

I wonder Outlaw will tell us if there is any obvious use wear, or signs of re-sharpening on the pieces in question. Or are they stage one, and un-used?
 
If you can't see that there is obvious sharpening on some of these in the photos quito you may want to have someone authenticate all the things you buy for you.
 
I would bet that some of them are alternately beveled on the other side
 
If you can't see that there is obvious sharpening on some of these in the photos quito you may want to have someone authenticate all the things you buy for you.

I wonder Outlaw will tell us if there is any obvious use wear, or signs of re-sharpening on the pieces in question. He may have them in hand and can tell best. We have so so pictures to examine.
 
Those round ends looks pretty thick to me. I wonder if they have been thinned.

Yep, more pics will help.
 
JMO they can be a couple of things, knife blades or performs, anyway they are nice.



Sent from my RM-845_nam_vzw_100 using Tapatalk
 
If you can't see that there is obvious sharpening on some of these in the photos quito you may want to have someone authenticate all the things you buy for you.

Umm, I said RE-sharpened. Like they had been used and sharpened again. Of course they had a sharp edge put on them initially.

Are you throwing around insults again?
 
the gray one looks reworked on its base
Speaking of use wear as an indicator, glad you mentioned it.

I wonder Outlaw will tell us if there is any obvious use wear, or signs of re-sharpening on the pieces in question. Or are they stage one, and un-used?
 
Status
Not open for further replies.

Users who are viewing this thread

Latest Discussions

Back
Top Bottom