Whites M6 vs Garrett 1350

[khouse]

The M6 runs at 14.7khz and the 1350 about 7khz. So the M6 should have a little better response to smaller lower conductive targets. M6 can lock the GB. But the M6 doesn't notch.
But you can easily run a visual notch since the meter has a large read out. To me the balance of the M6 is better. I would say the M6

 

Amazon Forum Fav 👍

Cry Of The Eagle: History And Legends Of The Cherokee Indians And Their Buried Treasure - Grab it through Amazon!

[vaquero44]

pretty much like KHOUSE said and the graphic target anylizer thing is not what it's cracked up to be go with the whites for sure on this!

 

[fatheadnc]

If you're coinshooting for silver the Garrett wins hands down. Down to around 7 inches the Garrett is one of the best coinshooters made. If you're hunting for relics the Whites machine would be the better choice because of the higher operating frequency. I actually like the belltone for coins cause its the sound of money. The Garrett is a much better discriminator for coin hunting with the sizing feature you dig a lot less trash. The Whites XLT is a much better coin machine than the M6 or MXT and is very close to the Garrett and slightly deeper but doesn't ID targets quite as good but close.

 

[gallileo60]

Thanks for all the great info guys................