EDDE
Gold Member
- Joined
- Dec 7, 2004
- Messages
- 7,135
- Reaction score
- 66
- Golden Thread
- 0
- Detector(s) used
- Troy X5
- Primary Interest:
- All Treasure Hunting
40 holes for 1 scalp 
in all 2 hours of hard ass work
(330 am to 530am)was great street lights were on for me 8)
and DAMN did i have to work for it
dug everything at and above pulltab
3 lamp mantels
couple old 12's
couple pieces o lead
boat load of tin and large iron
worse off its a construction zone so the ground is mixed up compacted UGH
clay, gravel, large 30 lb paver bricks hunks of stray concrete
for a 1893 or 1883 injun
it was in cased in a tar gravel rust ball
was a ripper at only 2 inch's
not in the bit iffy
had to run the sens. at 4 to avoid hopping signals with all the iron![:-\](https://www.treasurenet.com/smilies/undecided.gif "Undecided :-\")
OH and a kick ass ceramic bottle
vulcanizing substitute
-------'''''--------
(chipped)&M.Mfg. Co
you read it ladies im "safe" 
Akron,O.
in all 2 hours of hard ass work
(330 am to 530am)was great street lights were on for me 8)
and DAMN did i have to work for it
dug everything at and above pulltab
3 lamp mantels
couple old 12's
couple pieces o lead
boat load of tin and large iron
worse off its a construction zone so the ground is mixed up compacted UGH
clay, gravel, large 30 lb paver bricks hunks of stray concrete
for a 1893 or 1883 injun
it was in cased in a tar gravel rust ball
was a ripper at only 2 inch's
not in the bit iffy
had to run the sens. at 4 to avoid hopping signals with all the iron
OH and a kick ass ceramic bottle
vulcanizing substitute
-------'''''--------
(chipped)&M.Mfg. Co
you read it ladies im "safe" Akron,O.
Upvote
0
