Amazon Crew of the Tank Find a Large E.O. at the Jupiter Site!

capt dom

Hero Member
Joined
Nov 9, 2006
Messages
995
Reaction score
287
Golden Thread
0
Location
Jupiter, Florida USA
Today we were out doing a video shoot for Fortress Anchors
one of our sponsors. We had to get a few shots of scantily clad
pretty young things heaving and hauling in Fortress Aluminum Anchors

{rough duty} :smileinbox: :smileinbox:

We decided to drop the gear and test their holding power, {there was a pretty good swell going on}

Take a look at what we {Actually Bart Hetfield} found!

I will post some more photos as they download

This thing was pretty heavy and we hope fellow T-net shipwreck specialists may help
us identify it

Thanks Bart.
 

Attachments

  • First Dive 027 (1).webp
    First Dive 027 (1).webp
    23.9 KB · Views: 1,123
  • First Dive 063.webp
    First Dive 063.webp
    34.7 KB · Views: 1,117
Here is a shot of the Amazon Crew

and a few more of the E.O. after we took out specialized aracaologi
tools to it so that one may better identify its use on board a vessel.

Now Bart's new nickname is going to be "black bart" when he tries and clean his hands!
 

Attachments

  • First Dive 048.webp
    First Dive 048.webp
    41.7 KB · Views: 1,104
  • First Dive 079.webp
    First Dive 079.webp
    61.3 KB · Views: 1,101
  • First Dive 073.webp
    First Dive 073.webp
    25.8 KB · Views: 1,112
  • First Dive 081.webp
    First Dive 081.webp
    50.9 KB · Views: 1,112
Capt Dom, I saw you anchored and blowing out there on the webcam. That looks like a big ring, 2 links of chain and a big pin. I would assume from a boat. Oh, nice looking crew too!
 

Hi

Arh me crew ain't too shabby!

I think you may be on the right track....
It may well be from a boat!
Lets hope it wasn't from a space craft!

The esteemed Reverend Bouchless was looking for one out here once and the
state actually gave him a permit to do so.
 

Attachments

  • First Dive 0362.webp
    First Dive 0362.webp
    46.6 KB · Views: 1,101
I mean a regular boat, but it could be from a barge, or something on a barge like a dragline, or something like that. Obviously something heavy duty!
 

Hi Steve,

Pardon my old fart sense of humor.

Upon closer examination one can see that it really isn't chain.
The big ring is actually shaped like a and eight. There most definitely is
a deck or through hull fitting with an ornate "bullet" type cap end.
This was probably fashions so a line would not get caught on it.

There is a smaller "eight type fitting on the above pin but it was crudely forged with an angel so it could swivel
around the pin. There is one bigger closed ended like one flexible link connecting the larger "8 shaped ring
to the swivel. The larger ring may have had a wooden block or dead eye that rotted away.

The metal is very grainy. And the aracaologi "smell test is of high deteriorating sulpher content.
There was a heavily grained ship's spike also in the E.O.

but SHUCKS,.... no gold or silver coins = like in the past!
 

I don't see what you guys are looking at - my eyes keep wandering to your crew :)
 

Au... Dreamers

I think you got it!
It also may be a block used on
a yard lifting boom.

This morning I went at it with some more of me arkeolgkeal impliemts
so here are some cleaner photos.

She certainly is old but may be not real old...
 

Attachments

  • First Dive 004 small.webp
    First Dive 004 small.webp
    109.2 KB · Views: 977
  • First Dive 006.webp
    First Dive 006.webp
    105.7 KB · Views: 977
Sorry to distract you Cubfan.....
but look at the end of the lifting boom
on this old barge just happened to be named
"The Salvor"

Does red make a good color for diving uniforms???
 

Attachments

  • The Salvor.webp
    The Salvor.webp
    207.8 KB · Views: 986
Red is OUTSTANDING for a diving uniform, but it depends completely on what's wearing the uniform ;D

It looks like you're on target for your find. One of these days I'd like to get down your way and see what REAL treasure hunting for pirate treasure is all about.
 

Its just a matter for us Scoundrels {that what K.C. Smith defines treasure hunters as} to respect arkaologial principls
 

Sure looks like the anchor hanger for the Salvor. Good eye!
 

UP DATE: !!

We posted a fun video of Bart cleaning the E.O.

and we just got this reply:

Jim Anderson

The piece I see is the same? 55min into Voyages "The Search for the Atocha" 2004. Shows a panning of the conservatory, and there in the back ground it is identical.

Good Luck

Now I thought this was from the barge "Salvor" that worked on the excavation
of Jupiter Inlet in 1921!

Shows you how much I know!

Cornelius - is right! "It is the story that counts"

and it is better that we share information....
this is how people learn !
 

Dom,

What you have there is a deadeye off of a galleon.Yours is missing the lignam vitae wood that goes inside the iron ring.The iron spike is what holds it to the side of the ship.If i can find my history of deadeyes book,i can date that deadeye.The pic is what the wood that is missing should look like.
 

Attachments

  • deadeyewood.webp
    deadeyewood.webp
    3.1 KB · Views: 751
I found the book.What you have is a lower deadeye.lower deadeyes arecommonly strapped directly to iron chain plates fastened to the hull. A iron rod is usually doubled around the grooves of the deadeye and bolted or riveted to the chain plate.With this iron strap the deadeye is said to be ironbound.This has been common practice for many centuries but previously vessels were hempbound.Chain plate design varied considerably threw the ages due to evolving hull shapes and new materials.

A 8 inch or larger deadeye would have been on a square rigger ship.
 

Attachments

  • deadeye.webp
    deadeye.webp
    15.7 KB · Views: 743
  • My1600-1690deadeye.webp
    My1600-1690deadeye.webp
    53.9 KB · Views: 736
Dom, I already forwarded you an email from Jim Sinclair about the dead eye/chain plate assembly. Jim said that Greg Bounds found an even larger one on the 1715 fleet last year. I have no doubts the artifact is from your shipwreck. That area may be a good place for us to do some digging. Nice video. :icon_thumright:

Tom
 

This is what T-Net should be all about.

Sharing information so we all can learn. Thank you all for your
input. One thing for sure - except for Pawel Nowak - I welcome
any and all comments and information.

In the past I had found a piece of standing rigging that turned out to be
a fixed chain plate fastener. This is different in that it is made to swivel
and will have carried a much larger block.

Tom, you will be with us when we go right to the spot!
 

Hey Dom, its really puzzling that the REAL professional archaeologists do not help contribute to the identification of these objects. I tell you, FISHEYE should have a PhD just from his personal experience! Where are they (the professional archies) when it comes to sharing information?
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom