Anyone had the problem with the meter on a Whites Eagle Spectrum going blank?

piggman1

Silver Member
Apr 7, 2007
3,120
5
Austin, TX
Detector(s) used
Whites Eagle Spectrum, Compass X-100, Whites Beach Hunter ID, 2 Whites Spectrum XLT's
Lately my VID meter on my Eagle Spectrum will go blank after using it for awhile. You can't read anything. It doesn't seem to effect the machine, you just don't get any reading. You can turn it off and then back on, and the meter works again for awhile. At first I thought it was this heat that was effecting the meter, the way if you leave a LCD display in the hot sun and it blanks out untill it cools down. Has anyone else had this problem? Any help or suggestions would be appreciated.
 

I htink I had that promblem once many years ago I wouldsend it back to whites and what I think it is,is their is something that came lose someplace I don't know if I would open it up or not myself maybe you could tak it to a detector shop and they could do it
 

Read one of my other posts. Goes blank because pins to a ribbon wire harness have become oxidized - simply clean the pins. *one post tells how to open the case.
 

Top Member Reactions

Users who are viewing this thread

Back
Top