Anyone using the new 2013 Gold Hog Mat //// What is working combination

[gtxkid]

I am going to build a sluice for Colorado and need some feed back on Gold Hog Mat.

Flair that runs into sluice.
First foot or so of sluice i was going to leave bare.
Then i wanted to use a 1 foot of Gold Hog Scrubber Mat.
After that i was thinking of 3 feet of Razor back then a foot of something like UR Mat at the end.
OH and where can i slip in some of that New 2013 Mat.

I need to know how to not glue it down permanent so that i can swap out different mat combinations.

Anyone that has comments please do.

 

[Brandx]

Headed out for the weekend to southern Utah to play in the dirt. Looking forward to putting my razor back mat through a real good test.

 

[Brandx]

Found some time to run a little dirt from my trip. Ran half of a 2 1/2 gallon bucket. Looking forward to running the rest when I have some more time.

 

[Doitlaynstyle]

 

[Sample Pan Dan]

Hell yes to the 3 day weekends! That gold hog mat looks great. Just curious why you didn't throw your cons in the crash box?

 

[Doitlaynstyle]

Hell yes to the 3 day weekends! That gold hog mat looks great. Just curious why you didn't throw your cons in the crash box?

The crash box has a lip and the pump at home doesn't flow enough to properly clear the crash box out. The pump out in the field can, but it's too much water for the matting so we feed it the same way in the field. Catch 22 lol

 

[Sample Pan Dan]

Ahh got it

 

[Bnell]

To use and conserve your scrap mat gorrila glue your scrap end to end. And you will have scrap left over,use it. If you miss cut your mat glue it end to end and cut to size again. Just take your time wiht it and match all of the grooves together. Had one miss match with ur mat (scrap) and taped together and mailed back to doc and didn't hear back from him. This was just before or during his flood and i think some other problems that he had came up. I'm not crazy about taping the edges of the hog mat and have glued another 1/8"+ to rb in stage 3 of my dredge. A very snug fit which is pressed to the bottom of the sliuce. No material running down the edges or under the mat. Just my 2 cnets worth.