What's new

AT Pro Tone and readings

MD'ing Zombie

Jr. Member
Joined
May 29, 2011
Messages
40
Reaction score
0
Golden Thread
0
Location
Altoona PA
Detector(s) used
Garrett AT Pro
Primary Interest:
Metal Detecting
just trying to get an idea what others are are getting, for tones any numbers. No for the most part i try to go by tone, but still look so to learn my detector better. Oh this is in Pro mode.

Dime 80-81 Med Tone
Quarter 86-89 high tone.
Penny 77-79 Med tone
Nickel 54-56 low tone.

Have yet to find anything better. i know my wedding ring is like a set 68 on my air test. but above are ones i pulled that are in the ground for a while.

anyone fill in the blanks on silver or gold rings or coins. or anything that can help fill out this list. going to be a long winter, trying to find way to past the time :p
 
Due to various parts, components and internal settings not all detectors of the same model are created equal and give the same response to the same target under the same conditions. What numbers I get on a dime might not be the same for you. You just have to learn your own machine and how it responds to targets where your hunting. It might not give the same readings or tones at another location due to EM fields or even temperature. Some even claim it depends if they are wearing their lucky socks.
 
Your readings seem to be consistent with my wifes AT Pro. Gold on our air test was also in the 60's. I found a nice sterling band with it the other day and it was consistent 98/99 on my sweeps. Also found an old token and it was low 80's. Hope this helps.HH
 
Well i get a 62 on my wedding band gold 14k.... and a 67 on 1913 $5.00 Gold coin.....Like sand man said every one will not get the same reading ........ close but not the same to many variable's..........
 
found 5 lagre this past month and all were a solid 80-81.
 
Was iron audio on or off in pro mode. Did you ground bal nearby? The tones on my atp are different for the #s listed. 75 up = high tone 75 to 40 med tone 40 down low tone. What was ur iron disc. If it does this consistantly(what you listed) suggest you call garrett. Machine may be out of calibration.
 
Here's a few of mine.

18k thin mans wedding ring: 53-43
Several silver rings: 90-96
Silver quarters: 92-95
Silver dimes: 85-92
Canadian Pennies: 75-79 new clad, 80-85 old ones.
New Canadian clad: anywhere from 48-56 on nickles to 70-95 with iron audio growls mixed in for dimes, quarters, loonies and toonies. Really hate steel crap.
 

Users who are viewing this thread

Back
Top Bottom