gleaner1
Silver Member
- Feb 1, 2009
- 4,495
- 1,038
- Detector(s) used
- Sometime(s)
- Primary Interest:
- Other
True enough Prof. Unfortunately its difficult to obtain schematics or diagrams. Then one has to know how to interpret them to use them effectively. With training or just self study reverse engineering is the only way to go to discover how a system is structured. However there are certain basic principles that should be followed when attempting to modify an unknown system~ research is one key and basic electrical knowledge another. Never assume Your probably aware of this however.
gleaner: In this old discussion we never got feed back on how the power supply was structured~
The op stated that his battery pack tested at 18v. If the batt pack only has two terminals, then the power supply (batt pack) has been 100% verified.