lost items recovery
Bronze Member
Broke the arm cuff the other day being to aggressive with it. Bummed out and wanting to do a afternoon hunt the other day I whipped this up in the am as a quick fix to get me back out there. Cut off 3 3/4" of 4" PVC pipe cut a piece about 2" deep from center and cut angles on the cut corners sanded them down to bevel/ round the edge down and used the cut off piece to use as a stand to keep control box of the ground. Drilled 2 holes though both parts I made as well as the shaft used 2 bolts with wing nuts and took a wrist/ankle strap from my weight set and screwed it into the PVC cuff with short tech screws, painted it up and off hunting I went. Beats waiting to order a new one and heck it's not that bad looking and certainly stronger and cheaper then buying one. Thought I'd share this in case someone else has a similar problem.
Attachments
Last edited:
Upvote
0
