do you drag the MD on the ground?

[Mr.Jody]

Just thought I might ask, "Do you guys actually drag the coil on the ground or above the ground? I thought I better ask befor I wear the bottom off of mine...lol

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[jeff of pa]

I scrub the ground

With a coil Cover, So I don't need to buy as new coil.

It depends on detector type Whether
air is OK or not between the coil & the ground.

The sovereign looses Depth Greater then the Amount of Air under the coil.
& also looses ID accuracy

 

[SC_hunter]

I go about half inch above the ground..maybe an inch or so when I get tired.

 

[bazinga]

Just pretend that you are the coil and the ground is that hot young girl you just took to prom. The night is coming to a close... how close to her would you like to be? That's how close your coil should be to the ground.

 

[MD Dog]

Wow no wonder all the girls wanna go detecting with you bsco !

 

[bazinga]

Wow no wonder all the girls wanna go detecting with you bsco !

Haha, oh yeah, there ya go!

 

[MD Dog]

BTW the only thing I drag on the ground is my knuckles, well except when I'm necked. Maybe that's why all the girls wanna go detecting with me too !

 

[BuckleBoy]

The distance between the bottom of your coil and the ground is the amount of depth you've lost when you detect. Keep it low.


Buckleboy

 

[MD Dog]

Yep gotta talk to the care taker at the local parks and school fields, tell em to cut the grass shorter cause I'm loosing depth. Prolly be losing teeth after that.

 

[bazinga]

Yep gotta talk to the care taker at the local parks and school fields, tell em to cut the grass shorter cause I'm loosing depth. Prolly be losing teeth after that.

Psh... they barely mow the parks around here anymore. The parks department is way over budget and they can't afford to mow. Most times I go out I have to deal with 6" tall grass.

 

[MD Dog]

I scrub the ground

With a coil Cover, So I don't need to buy as new coil.

It depends on detector type Whether
air is OK or not between the coil & the ground.

The sovereign looses Depth Greater then the Amount of Air under the coil.
& also looses ID accuracy

I'm curious about what you call the scrub method, is that a left and right action or a back and forth one ?

 

[Sandman]

Scrub method is as close to the ground as you can go and most times touching it while scanning side to side. Your choice, left to right or right to left. You go back and forth when pinpointing as the target will sound off with the DD coils like on the Sov GT just off the tip.

Back in the old TR days the coil sat on the ground as that was about the only way to keep it a balanced threshold. The coil cover was rounded on the bottom for sliding better.

 

[Michigan Badger]

I usually run about an inch above ground but with Minelabs I usually scrub the ground (unless it's rocky) because the less air between the coil and the ground the better. At least this is what master users have told me so I stay with it.

Most brands lose lots of COIN depth if the coil is more than about 2 inches above ground.

Badger

 

[MD Dog]

Thanks Sandman and MB. Don't see how that method would work with grass over an inch or with uneven ground, but since I use my 250 with 12" coil I get all the depth I can handle. I mean honestly who wants to dig deeper than six inches ? I struggle when I have something eight inches deep and I just give up when it's deeper then that. Seeing how I've never(Except in a plowed field) found anything good deeper than six inches. It's almost always junk or Iron. Now I here the latest theory is that old Copper sound off as Iron when they're deeper than six. What's a old broke down soldier supposed to do. Well I'm still workin on that whole water thing Sandman.

 

[TerryC]

I scrape the ground.... with a coil cover. I eek out every fraction of an inch I can. If the ground is turned over, as in a construction site, I modify, adapt, overcome. TTC

 

[txkickergirl]

yep low and slow, I scrub the ground.

I have found that with some garretts you can't do that with. Now my dad on the other end, I gotta find a way to get it across to him that you do not hold it a foot off the ground, especially when I am digging things at 12" as it is. He wonders why he can't find stuff and I follow behind him finding things.

 

[ClonedSIM]

This should be set up as a poll. I agree!

Use a coil cover and scrub that soil!

 

[bazinga]

I mean honestly who wants to dig deeper than six inches ?

I think the opposite. Who wants to dig something only 6" deep? It's generally modern and not old enough to make me happy.

 

[BuckleBoy]

I mean honestly who wants to dig deeper than six inches ?

I think the opposite. Who wants to dig something only 6" deep? It's generally modern and not old enough to make me happy.

I don't know where You're diggin, but where I dig (the woods, yards, plowed fields...just about everywhere except the pastures) old finds ARE consistently in the less-than 6-inch range.


-Buckles

 

[bazinga]

I mean honestly who wants to dig deeper than six inches ?

I think the opposite. Who wants to dig something only 6" deep? It's generally modern and not old enough to make me happy.

I don't know where You're diggin, but where I dig (the woods, yards, plowed fields...just about everywhere except the pastures) old finds ARE consistently in the less-than 6-inch range.


-Buckles

Just to your north. Indiana. The vast majority of old coins that I find are 6" or deeper. Yes, I do find quite a few 4" deep silver silver, wheats, indians, etc. But MOST are deep. There are very few targets left in the range of 6" or shallower. They have all been found.