dogdoc9

[dogdoc9]

Hi... I'm brand new to metal detecting and I just purchased a Garrett Ace 400....I was doing bench test with several different coins to just familiarize myself with the machine... my problem is that I buried coins at a depth at 2" and my machine did not alert at all... Am I doing something wrong? Thanks for any advice ....

 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!

[digging440yrs]

Welcome aboard

 

[Peyton Manning]

you must be, any detector should pick that up

 

[Professor of Engineering]

Hello dogdoc9,

What were some of the "air test" depth readings? Did the ID number match know US coins? Were the coins buried parallel to the surface or on edge (perpendicular)?

I believe even the cheapest detector you could buy reads a coin at 2". Please answer the questions above and one of us can hopefully diagnose the problem.

Regards,

Doc

 

[vpnavy]

Welcome Aboard dogdoc9! You didn't list your state (or country) in your profile. So, you might consider jumping over to Sub-Forums: Select Your Area.... and selecting location information (i.e., clubs, hunts, finds, legends, maps, etc.) directly related to your state (or country).

You might consider browsing Forum > Metal Detecting Forum > Brands > Garrett for information relating to your MD. You might also consider posting your problem on that forum.

 

[Enginefitter]

Welcome from NE Ohio.

Engine

 

[smalltowngirl13]

Hello and welcome to the forum...

 

[against the wind]

Welcome to Tnet.
You may want to call Garrett.
They will walk you through your settings and determine whether it is your settings or the machine.
Garrett has an excellent after sales , service/support center.

 

[bootybandit]

Welcome to TNET!