hammered copper???

[jangrok]

quick hunt this morning in my backyard when I came upon a deep signal with the nox 800. it was ringing a little bit above the copper range 22-25. dug the plug and it was sitting about 7-8 inches in the ground. Its really toasted and really thin and could just be a round piece of metal. all I can make out is the number "7" on the right side of the coin. I know its a long shot without other details but A) is this in fact a copper coin? B) anybody have any idea what hammered coppers had the date on the right side?

 

Amazon Forum Fav 👍

Minelab PRO-FIND 35 Waterproof Pinpointer Metal Detector for Experts with Tone ID & Adjustable Sensitivity - Grab it through Amazon!

[keossvin]

Def a hammered. Dug them alot here in the Netherlands.

 

[rebbel31]

Its more likely a "Milled Coin", but its hard to tell without a date. They started milling coins in the 1600's.

 

[jangrok]

Def a hammered. Dug them alot here in the Netherlands.

that's awesome! I found this in New Jersey.

 

[jangrok]

Its more likely a "Milled Coin", but its hard to tell without a date. They started milling coins in the 1600's.

thank you for the input! I wish it had more detail, when did they stop milling/hammering coins?

 

[cudamark]

Looks like a copper cent run over by a train.

 

[Erik in NJ]

I disagree with the poster from Netherlands that it's hammered. It's appears to have some writing at about the 7 o'clock position in your pic. Don't clean it as you'll lose any detail that might be left. Where do you see the 7? What part of NJ was it found in? Interesting find.

 

[rebbel31]

that's awesome! I found this in New Jersey.

Techichally they still mill coins it means they are machine pressed. Just way more efficient now, depending on the area they stopped hammering mid 1500's to the late 1600's from what I've read.

 

[smokeythecat]

Please rotate the image 180 degrees. I think its not a "7" but part of a larger design. And it's upside down...I think.

 

[keossvin]

I disagree with the poster from Netherlands that it's hammered. It's appears to have some writing at about the 7 o'clock position in your pic. Don't clean it as you'll lose any detail that might be left. Where do you see the 7? What part of NJ was it found in? Interesting find.

I always refer to them as hammered but didnt know they were machine made. Even if they are stamped by a heavy weight its still a form of hammering isn’t it ? Just like the KG coppers. Not an expert in any of this but of anyone is able to clarify, thanks in advance.

 

[DizzyDigger]

Smokey, is this any better?

 

[smokeythecat]

Well, I have a best guess...and that is that it started out life as an early British copper. Those were milled coins. THEN someone took it and flattened it. A lot of times the native Americans would do that. I have one from a well known Rev War battle site the Indians were highly involved in and that's what they did to mine, and then cut two notches to hold it where they wanted it with string. Just a guess that's what it started out to be but it was never holed or made to accommodate a thread for wearing.

 

[Erik in NJ]

Anything on the other side?

 

[Digger RJ]

Nice!!! Congrats!!!

 

[jangrok]

I disagree with the poster from Netherlands that it's hammered. It's appears to have some writing at about the 7 o'clock position in your pic. Don't clean it as you'll lose any detail that might be left. Where do you see the 7? What part of NJ was it found in? Interesting find.

it was found in northwest jersey, near highway 78 a few miles from the Delaware River. I circled the "7"

 

[Erik in NJ]

Thanks for posting the pic. I'm not sure that's a "7" as the stem is very long and it's very angular in shape for a presumably old coin. Hopefully someone here can provide an ID. Nice find whatever it is.

 

[rebbel31]

I always refer to them as hammered but didnt know they were machine made. Even if they are stamped by a heavy weight its still a form of hammering isn’t it ? Just like the KG coppers. Not an expert in any of this but of anyone is able to clarify, thanks in advance.

Hammered means they were placed betwixt 2 dies by hand and someone whacked the dies with an actual hammer until the design appeared. Hammereds are known for their imperfections ie off center, weak strike, double strike, because each one was placed and whacked differently.