help

[biggenz]

i found this in a back yard in richmond mo i know its non ferrous it is medium weight for size surface is splotchy like galvanized steel not soft but not extremely hard pefrectly round about 3 inches in diameter it looks like it was poured in to a mold i found it about 5 inches below the surface. im stuck inbetween silver or aluminum any ideas

 

[mo dirt diggin]

Sorry I can't help with the id, you might list it in the what is it section. Welcome to the forum. HH

 

[vpnavy]

Here is the Forum > Our Discoveries > What Is It? section.

 

[UNC_]

looks like a cut out from a electrical box truthfully

 

[russau]

3 inch dia. isn't a knockout plug ! A 3 inch hole would have a hole drilled into he center of the peice for a 1/4 inch dia. drill bit and then use a knock out punch to cut it out and it would be sorta bent from the K.O. cutter !I've done a LOT of them over my 40 years of Electrical work !

 

[Treasure_Hunter]

Sorry, all pictures are out of focus so all we have to go on is it is 3 inch diameter. Doesnt look silver.

 

[AU Seeker]

It really doesn't matter because we'll never know what it is, this topic is 13 years old and the OP hasn't been back in 13 years.