how and when to use what sensitivity setting ????? BH3300

[Wayupnorth66]

[size=13pt][size=10pt]how and when to use what sensitivity setting...what setting is best on the BH3300?..I'm thinking the greater the better...but are there specific applications for less that "high" ? which do you use?
thanks[/size][/size]

 

Amazon Forum Fav 👍

A Handbook of Civil War Bullets and Cartridges - Grab it through Amazon!

[doctorbb]

Set it as high as possible but still maintain stability. In the area I live I could usually run mine about 3/4 max. sometimes a little higher. Wide open usually produced false signals.

 

[FelixtheCat]

I try to run it wide open ALL the time. Very few times have I needed to lower sensitivity. I usually lower it when I'm trying to work close or under playground equipment. I also run the standard iron-notch program which knocks off the first 4 bars. Still, I have found small gold on that setting so I know it does well.

 

[crashbro17x]

I will run mine on the wide open setting as long as it stays stable (depending on soil conditions), otherwise, I run it on the next to highest setting. Works good for me...I relic hunt mostly.

 

[revdrlon]

i run mine at 3/4 too, at 100% it sounds like a pinball machine

 

[dbleagle]

I have had good luck with preset settings.