How long for plug to re-attach roots?

StBarbara

Jr. Member
Apr 7, 2015
39
22
Denver, CO
Detector(s) used
Tesoro Outlaw
Garrett Pro-pointer AT
Primary Interest:
Metal Detecting
Some friends/neighbors want me to MD their yards (though I am a newbie and haven't even MD'ed my own yard yet). One person asked how long after digging and restoring a plug of lawn grass will the plug (typically) be reattached firmly to the ground? Once summer gets going here, people mow every week. Will the lawnmower detach the plugs I have dug and restored?
 

Upvote 0
Dig deep plugs so you don't disrupt the roots. Water the yard well after youre done detecting and everything will be fine in a few days.
 

Cool, Jason in Enid. Thanks for the tip!
 

Don't cut complete round plugs. Cut only 3 sides and leave the 4th side still attached. This type of "trapped door" plug won't die and will recover much faster than one you've completely cut and removed from the ground. A 3 sided plug is less likely to get pulled up by a lawn mower too. If the ground conditions are right, you don't have to cut a plug at all. Sometimes you can just cut a slit, spread it apart, recover the target, and then "stitch" it back closed again with your probe or screwdriver. Try these methods in your own yard before you subject any experimental torture to your friends/neighbors yards! :laughing7:
 

The C shape plug keeps some of the roots attached. Also use a ground cloth so you can dump all the dirt back in hole. With some practice, they won't see you ever dug a hole.
 

Depends A) where you are (region, state), B) what kind of grass, C) what time of year D) weather conditions (dry/wet) E) how big/deep the plugs are. F) how "heavy duty" the lawn mower is
In the south with big/deep plugs, during the rainy season they can re-stitch in a few days, however in the north, during dry fall conditions it could take six months.
There is no "silver bullet" answer. The above answers have all the info. If you want more detailed info about your specific situation please provide the following info:
A) general location, B) type of grass (if known) C) time of year D) size of plug.
Most turf-grasses are very resilient to this type of disturbance as long as it is a fairly large and deep plug, in fact it somewhat mimics herbivore activity.
The best guarantee is to deeply water plugs after re-positioning and water again every couple days for a few weeks. In most cases that would be overkill but better safe than sorry (especially in a friends yard) experiment on your own yard, in a corner to gain confidence.
 

Thanks for all of the tips. I'll experiment on my yard first...
 

My experience is that a "plug" (that really is a CORK), they don't survive, and get sucked up by the lawnmower!
You see, (detached) plugs were separated from the lawn around it, and no live HINGE is left attached - a bummer!
You want to dig a plug that use a Trap-Door-Effect, where everything fits back into its little original spot, when done
Be sure to poke at the loose dirt you just returned to the hole, shut the trapdoor, and STOMP or POUND on the
spot, to remove all air-spaces. Fluff-up the grass. There you have it - a low impact, leave-no-trace, dig site!
The land owners will also like you picking up the trash you dig and find. Yep, plus always ask permission to dig....!
(did I answer your question? - probably not) :laughing7:
 

My experience is that a "plug" (that really is a CORK), they don't survive, and get sucked up by the lawnmower!

Then you are doing it wrong. I have never had a plug die and never had one pulled out by a mower. You need to dig MUCH deeper plugs and stop killing the roots.
 

I've "dug" well over 1000 in 2 local parks, with something approaching 100% success. No, I didnt count and map each location...I cared enough and checked my results frequently enough to feel very confident making that statement.

My formula...bigger is better( not always comfortable with dozens of eyes watching you), leave the biggest hinge that you can, tamp back in place firmly.
Also, know when NOT to dig...too dry, grass looks overdue for mowing...DON'T DIG!
 

Lots of folks recommend C or U shaped flaps. I like those as well, but I've found a simple V shape works EXCEPTIONALLY well for avoiding turf damage. It acts alot like a simple cut in the grass. Tamp down and fluff, as suggested.

Cheers!

Skippy
 

Lots of folks recommend C or U shaped flaps. I like those as well, but I've found a simple V shape works EXCEPTIONALLY well for avoiding turf damage. It acts alot like a simple cut in the grass. Tamp down and fluff, as suggested.

Cheers!

Skippy

Agreed...the V makes for a nice big hinge!
 

Watch out for skunks. I detected a lawn a while back, one of my honey holes. Went back the next day and all of my plugs were dug out. The fresh dirt got the attention of a skunk. I caught him that night and no more problems.
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top