I don't believe it. But it worked. Dowsing

[Prairie Gazingfox]

I'm not sure what your asking.. Your within 20 meters.. Is it a Meteorite?

I wrote you my reply to your other/ first reply to me.
But I wanted to add, I am specifically looking for a container no older ( time when buried ) than 90 years.
Because ,for example if it is metal iron or case iron or" black steel " box or segment of a PIPE , hidden 120 Years ago, then it definitely has Tungsten or Molybdenum as an integral Part. Maybe AS much as 1/4 up to 1.5 percent EVEN IF THE producer didn't intend to LET Tungten enter the composition of that Tool box or whatever.... Maybe they didn't have very good separation process for the Ore material or didn't Know because that box was buried 120 years ago,right?
Well, then it must have been produced even another 30 years earlier or more.....
So in that case, also The Brittle in physical property ,quite low temperature Bismuth element ( number 83, right next to Lead ) Would have definitely become an integral part ( ad Bismuth is entwined with most gray Color containing ores underground ) .
So it will produce Long swing when measuring With Bismuth , almost as long ad the Gold or Silver Swing of pendulum,Regardless of Bismuth s very Poor Electroconductivity in its pure state!

Because as a structural part of a Very old cast Pipe or Steel mini tool box, it's Electroconductivity is much higher..... so to speak..... than when it is in an Amazon purchased crystal pure or almost pure state.

 

[achanceforgold]

Any surface mines not developed on? Snap a picture if so and send it in my messages. I’d like to see how they left the ground after it was stripped.

yes, quite a few areas are not developed.
All through the Carolina's, Virgina and Georgia.
But almost all the property is owned by someone.
That's the catch.
The State will own the land or a private individual will.

I'm about three hours from the closest mine.
I'm in southeastern Georgia. No Gold here.

This weekend I'll get some pics of some of the old mine locations
Most are not underground, just shallow pits in the terrain.
Or placer sites. This was the ealry days of gold mining.

Most people think pits are natural formations.
There are some underground mines though.

Check the laws of your state. Recreational/hobby panning on state land is legal in many state-owned locations.

for Georiga

 

[dowser]

I wrote you my reply to your other/ first reply to me.
But I wanted to add, I am specifically looking for a container no older ( time when buried ) than 90 years.
Because ,for example if it is metal iron or case iron or" black steel " box or segment of a PIPE , hidden 120 Years ago, then it definitely has Tungsten or Molybdenum as an integral Part. Maybe AS much as 1/4 up to 1.5 percent EVEN IF THE producer didn't intend to LET Tungten enter the composition of that Tool box or whatever.... Maybe they didn't have very good separation process for the Ore material or didn't Know because that box was buried 120 years ago,right?
Well, then it must have been produced even another 30 years earlier or more.....
So in that case, also The Brittle in physical property ,quite low temperature Bismuth element ( number 83, right next to Lead ) Would have definitely become an integral part ( ad Bismuth is entwined with most gray Color containing ores underground ) .
So it will produce Long swing when measuring With Bismuth , almost as long ad the Gold or Silver Swing of pendulum,Regardless of Bismuth s very Poor Electroconductivity in its pure state!

Because as a structural part of a Very old cast Pipe or Steel mini tool box, it's Electroconductivity is much higher..... so to speak..... than when it is in an Amazon purchased crystal pure or almost pure state.

Got it, no Telluride wouldn't be in the container, in trace, I doubt.
If your Dowsing for trace Elements, its a tough Dowse, but good idea.
I did it with Mercury in a Gold line.
I haven't done any Pendulum Dowsing, others on here might have ideas..
I Dowse connections from conjoining, my frequency to resonating Frequencies, thru my rods magnetic gap opening between them.

 

[KYgotGOLD]

yes, quite a few areas are not developed.
All through the Carolina's, Virgina and Georgia.
But almost all the property is owned by someone.
That's the catch.
The State will own the land or a private individual will.

I'm about three hours from the closest mine.
I'm in southeastern Georgia. No Gold here.

This weekend I'll get some pics of some of the old mine locations
Most are not underground, just shallow pits in the terrain.
Or placer sites. This was the ealry days of gold mining.

Most people think pits are natural formations.
There are some underground mines though.

Check the laws of your state. Recreational/hobby panning on state land is legal in many state-owned locations.

for Georiga
View attachment 2207501

Yes I’m trying to compare it to a few places. Thank you.

 

[dowser]

Got it, no Telluride wouldn't be in the container, in trace, I doubt.
If your Dowsing for trace Elements, its a tough Dowse, but good idea.
I did it with Mercury in a Gold line.
I haven't done any Pendulum Dowsing, others on here might have ideas..
I Dowse connections from conjoining, my frequency to resonating Frequencies, thru my rods magnetic gap opening between them.

It helps to enhance the field weather map Dowsing or on location..
To Dowse suspected trace Elements, place Uranium behind your signal towards your target direction, for additional enhancement..

 

[achanceforgold]

It helps to enhance the field weather map Dowsing or on location..
To Dowse suspected trace Elements, place Uranium behind your signal towards your target direction, for additional enhancement..

Stupid Question.

Can something offshore, underwater be dowsed?

 

[dowser]

Can something offshore, underwater be dowsed?

Yes, I signal Silver on South Manitou island 8 miles out. Plus I've Dowsed from a Pontoon to run tests..
I think Sunken Treasure in large quantities,would be an easy Dowse.
Somebody on here Dowses frequencies off the West Coast.

 

[dowser]

Yes, I signal Silver on South Manitou island 8 miles out. Plus I've Dowsed from a Pontoon to run tests..
I think Sunken Treasure in large quantities,would be an easy Dowse.
Somebody on here Dowses frequencies off the West Coast.

I would go to the Philippines and Dowse for Million dollar Pearl's.. No ties to any gov..

 

[dowser]

The way I Dowse it, is the object projects vertical lines off the perimeter, pear shape down, is pear shape dowsed above.
Connection is a horizontal connection, running vertical above the water. Frequencies can be directed, and take the path of least resistance.
The vertical lines in the water are connected horizontal above the water, not thru it.
Frequency connection line, number alignment is easier in air, for mother nature.
A connection line across water might go further than one on land..

 

[Prairie Gazingfox]

Got it, no Telluride wouldn't be in the container, in trace, I doubt.
If your Dowsing for trace Elements, its a tough Dowse, but good idea.
I did it with Mercury in a Gold line.
I haven't done any Pendulum Dowsing, others on here might have ideas..
I Dowse connections from conjoining, my frequency to resonating Frequencies, thru my rods magnetic gap opening between them.

Yes ,Tellurium because brittle Semi-metal with melting temperature only of 450 Celsius.
The Silver is 962 Celsius, Gold is around 1064 , Copper s melting is 20 degrees higher around 1085 Celsius.
- In my opinion, brittle metaloids have had hard time entering US coin contents after say 1860s. Before that I don't know!
Maybe in Very Old Silver coins or dimes or Spanish....
Bur i have to check the abundance of Tellurium in the Earth crust, how it compares to the Main ones that enter the composition of the typical 1800s or 1900s coins...
If an element is quite rare like Tin or Antimony, it definitely wouldn't enter the composition Except maybe as very miniscule Impuritues. Like you said....
And Antimony, is not healthy to hold in your hand for maybe more than 3 seconds.... so it's not even a possible choice for a witness.

Yes ,it's very difficult Thing triangulating for how much of what pure element is Presentnin a spot. And even more difficult to Compare it's mass ( or even if it is there ) presence to another Gray Color elements presence in the same spot.


I have found many times small metal fragments of old Domestic utensils,etc.
But most often Earth materials such as a Bluish- greenish fist size stones at a depth of 16 inches and nothing around it. Either man- made or From the the Earth.
Based on my detecting what's feet or several yards nearby that STANDS ALONE in it's position in the ground, the next such is usually 4 to 8 yards away....
But this is Chicagoland!
It doesn't have many concentrations of Gold within minerals THAT are significantly RICHER than anything around within the Humanly possible to Diagnoze area of say 50 yards diameter in 2 hours time.....

>>> I am feeling You are able to project Thought patterns into a Long physical distance that are Analyzed by Your mind through the RODS.

I didn't try with rods for a Long time, years. I am not good at them

 

[achanceforgold]

Yes ,Telluride because brittle Semi-metal with melting temperature only of 450 Celsius.
The Silver is 962 Celsius, Gold is around 1064 , Copper s melting is 20 degrees higher around 1085 Celsius.
- In my opinion, brittle metaloids have had hard time entering US coin contents after say 1860s. Before that I don't know!
Maybe in Very Old Silver coins or dines or Spanish....
Bur i have to check the abundancenof Tellurium in the Earth crust, how it compares to the Main ones that enter the composition of the typical 1800s orb1900s coins...
If an element is quite rate like Tin or Antimony, it definitely wouldn't enter the composition Except maybe as very miniscule Impuritues. Like you said....
And Antimony, is not healthy to hold in your hand for maybe more than 3 seconds.... so it's not even a possible choice for a witness.

Yes ,it's very difficult Thing triangulating for how much of what pure element is Presentnin a spot. And even more difficult to Compare it's mass ( or even if it is there ) presence to another Gray Color elements presence in the same spot.


I have found many times small metal fragments of old Domestic utensils,etc.
But most often Earth materials such as a Bluish- greenish fist size stones at a depth of 16 inches and nothing around it. Either man- made or From the the Earth.
Based on my detecting what's feet or several yards nearby that STANDS ALONE in it's position in the ground, the next such is usually 4 to 8 yards away....
But this is Chicagoland!
It doesn't have many concentrations of Gold within minerals THAT are significantly RICHER than anything around within the Humanly possible to Diagnoze area of say 50 yards diameter in 2 hours time.....

>>> I am feeling You are able to project Thought patterns into a Long physical distance thst I'd Analyzed by Your mind through the RODS.

I didn't try with rods for a Long time, years. I am not good at them

you guys are way above me head and knowledge base.
but please continue.
maybe I'll pick up a thing or two.

 

[dowser]

I was just running tests on my 2 frequency stones, and one is different than the other, it's not a Master key.. It doesn't harm anything, because I checked. I placed it in my Chives.
But I did learn, my Master key stone works best when placed directly on the ground.
At strong Dowsing power times it doesn't matter, but even a Generator might work better, if placed on the ground, out in the field .

 

[achanceforgold]

I was just running tests on my 2 frequency stones, and one is different than the other, it's not a Master key.. It doesn't harm anything, because I checked. I placed it in my Chives.
But I did learn, my Master key stone works best when placed directly on the ground.
At strong Dowsing power times it doesn't matter, but even a Generator might work better, if placed on the ground, out in the field .

a question Mr. Dowser.

Does weather play a role?
the reason I ask, earlier today, my wife got no reaction on the map dowsing.
But later, after it started raining the dowsing seemed to work.
When she did her first dowsing it was raining also.

 

[dowser]

a question Mr. Dowser.

Does weather play a role?
the reason I ask, earlier today, my wife got no reaction on the map dowsing.
But later, after it started raining the dowsing seemed to work.
When she did her first dowsing it was raining also.

Spaceweather has a role, the positions of Bz affects Dowsing power, I believe.
I haven't been able to tell. At times the rain causes Doppler Microwaves to bounce around, which seems to cancel Dowsing, but other times I can Dowse during rain.
Stand stationary with the rods antenna over the signal or target.
Dowsing power is off 50 percent of the time, and the 50 percent is subject to other frequency interferences. On and off while using it..
Its off more at times, and on more at times..
The rods will show what I'm talking about.
When Dowsing is working, start the Microwave, watch Microwave interference shut it down.
I thought Bz North is favored for power, but I'm possibly wrong.
I think Bz, Bx, and By, has a preferred orientation for best Dowsing.
20 yrs ago, power was on much stronger, and I'm not sure that it's not getting worse.
It was 3g, then 4, 5g.
Microwave Frequencies are bad for Dowsing, but we can use a Microwave/ wifi frequency 4.2 Ghz, it's a Master key, similar to 13.5 khz.

 

[dowser]

Constant Dowsing power interference is a hassle. You have to learn to Dowse the peaks of the 3 pulse sequence, Schuman resonance.
The Schuman pulses indicate ongoing Dowsing power strength.
If all 3 pulses are indicated by the antenna, power is strong. If only 2, or just one pulse is registered, strength is down.
Its a 3 pulse main frequency sequence, then repeat. Running about a second a pulse.
When power is bad Dowsing is only one Schuman frequency, allowing a 2 second gap of no power.
It would be on one second, off 2, on one, off 2 ect, ect. Sometimes the one pulse gets disrupted also.
That is what I'm Dowsing, not sure about anyone else....

 

[dowser]

Dowsing interference is keeping me from teaching.
I can show someone everything they need to know about Dowsing, in half a day.
But if Power is off, I'd fail as a Dowsing instructor.
I've haven't seen it off more than a day, but I've never checked for power the whole time I assume it's off..

 

[dowser]

Every Atom is being resonated by one second pulses. A displayed generator frequency on a powered up frequency generator, is resonated by mother nature.
We can enhance mother nature's signals, but not create a Dowsing field.
A calculator cannot create a resonating frequency, I doubt. Someone's trying I know.

 

[russau]

I've been dredging in Geogia several times and got fine gold (no nuggets) and had a great time doing so ! about the post from achanceforgold and using frequence's for finding gold ,oil , etc. I have read and researched using frequencies for finding things in the past and found out that EVERY THING ON EARTH HAS A UNIQUE FREQUENCY that it will respond to and that mineral ,paper, wood ,ETC. will respond to. to do this you need a variable frequency device and using brass rods bent at 90 degrees . connect the variable frequency device (positive / negative ) Positive to the item inquiring about and the NEG. to a ground rod .as this freq. is applied to this you have your brass rods over the material and as you increase the freq. slowly you wait until you see the rods cross . at that point you write down that freq. and do this on as many minerals / items you may be looking for! Now go to a area that you want to search for (what ever !) and walk around with the rods out in front of you lose in your hands. and when the rods cross your over the item your looking for that is between your feet ! now turn 90 degrees and slowly move off that spot counting the distance until the rods start to UNCROSS and that is the approximate depth of your target! Now you can do this in several locations using a compass to determine a line on a map or on a chart U.S.G.S. 1/4 scale and do this in several different locations to get a X marks the spot when these lines that you just determined cross ! We did this in Southern New Mexico and we got some fine gold when we were there about 20 years ago BUT as the old story goes we had to get back to work to make a living! So much for me getting rich ! It worked for me and my partner ! We had fun doing this.

I may add that the length and the diameter of the rods make a difference . the longer and the smaller diameter , the more sensitive they are and vice versa to the fatter and shorter they are the less sensitive they are ! I preferred the shorter & thicker rod to keep me from walking all over the place. Remember to remove all metal or you'll get false readings.

 

[achanceforgold]

well,
I'm learning.
Not understanding everything
But I'll get it.

I kept zooming in on the area she targeted.
this is where we will start.

Not sure if you can see it, but there is a small creek there in the middle.
A good place to start.

Gosh, I hope this works.

 

[russau]

I may add that the length and the diameter of the rods make a difference . the longer and the smaller diameter , the more sensitive they are and vice versa to the fatter and shorter they are the less sensitive they are ! I preferred the shorter & thicker rod to keep me from walking all over the place. Remember to remove all metal or you'll get false readings.

Plus , if there is any gold in any home, on you or phone company equipment anywhere it will pick it up and you will kick your self when you realize it !