Just Drill Holes

It full blow Jesuit. The hole is a triangle with a smaller triangle inside it. This is a better picture of it. The triangle is on the right and the elongated on left. I've posted it before with different lighting
baf9a023076d1a696b1127e38c4bd8b1.jpg


Sent from my SM-G900T using Tapatalk
 

300' west of stone is this tree.
a5dabc96e8880ae18dcb9d7b923afbbb.jpg


Sent from my SM-G900T using Tapatalk
 

Bob the only thing that I have seen that is close was a 8 inch drill hole 4 inches deep with a shoulder on making it kinda look a horse shoe which after measuring it was three cordels and it looked toward a 3 inch horzional drill hole with a deer track in the bottom. Never seen a drill triangle Just shows you that there's more stuff to be figured out. It may be to show you a triangle layout in large boulder's generally they showed something inside the yard either dots, square, triangle, rectangle, takes lots of steps to get it worked out
 

Thank you Dsty for your time and knowledge.

Sent from my SM-G900T using Tapatalk
 

miboje, I don't know if its me / the computer / I see a small dot in the center with a line a crook in it, on the right it looks like a head with a nose hole and a mouth with a stream type symbol, the largest of the drill holes has a hole going to the left and another set of holes going to the right and down a bit. Generally I don't get involved with small type close things but you have been very understanding and I thank you for that. Most or 99.9 percent of what I am after is how they laid out this land, Its kinda like trail markers, what they mean just really blows my mind, knee high = cordell 189.5 feet (I round it off to 190 feet ) There is a round knee high rock in palo duro canyon that has face , 6 feathers around the top of its head, and if memory serves it has two eyes and a round mouth indicating a triangle right looking East = to me that's 6 X 190 feet = 1140 feet, Why / what is that for, I'll just bet there's a lay out of boulders around the face and another 1140 feet to the east, the first on will have ALL of the information and the 2nd will have the cache,
 

attachment.php
 

Attachments

  • Resized_20160910_120738.webp
    Resized_20160910_120738.webp
    212.7 KB · Views: 301
Just wanted to show you this drill we ran into. It was an exibit in an old mining resturant, but would be similar to what they would use to make some of these holes.
 

Sheś ready to hit the woods as soon as the snakes go to sleep... and already experienced with pick and shovel.
 

looks like she has grown 4 inches since I was there, gonna make a good runny buddy. Thanks tell the rest of the family Hi for me.
 

Can anyone tell me how to measure a 1/2 by 1/2 drill hole. It horizontal , ground level and is the final marker. Thanks Rocky
 

they think about these holes?



It is the same stone



Is another stone




all in the same area
 

GABRIEL I've seen this set up. It is like mine in a lot of.way. you are among the best for that here. Just give them time to answer

Sent from my SM-G900T using Tapatalk
 

Hi friends

These three rocks form a triangle







the other stone is 240 feet.

3 meters of this.

 

I would measure the distance between the three. get compass readings from each. then follow the inverted v on the middle stone.
 

they may also each be indicating seperate trails. it will take some time and field work to determine, so don't be in a hurry.
 

I would measure the distance between the three. get compass readings from each. then follow the inverted v on the middle stone.

The distance between alien and skull is 27 feets, the distance between alien and frog is 51 feets, the distance between skull and frog is 60 feets.


These are the original ground positions


The skull north.

 

Hope I'm on the right thread. Do these look like drill holes to anyone besides me? They are in a cave. What do you think?20170102_131713.webp20170102_131740.webp20170102_131920.webp
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top Bottom