vegas247
Jr. Member
All, Even if you do not have an E-terra70 I believe you could still help meout with this. As a group with tons of exoerience any help would be appreciated, Thanks so much, Grant
X70 I just got mine two weeks ago At every turn or change in setting I'm getting worse off! I finally found a deep penny 8+"S but lately everything is 3"s or lower : ( MY XL pro can do that.) I have two coils the 6'DD 18.75kHz the 10X5' 18.75kHz elliptical DD and the stock coil I'm hunting in moderate to sum what higher mineralized ground as the Parks are next to rivers and I've dug black sand 200' from the river! an a lot of area with no gound noise anyway I've tried was skunked today until I switched to tracking with beach mode on and got 8 pennies immediately good right? well they were on the only at 1" I know I'm missing coins. and just haven't come up with a good setting VDI ( just sumps unless target is under 3"S) GB NC thresh hold all together I've been hunting on pattern 1 with threshold at 13 and sensitivity at 20-27 problem was I didn't record or pay attention when I dug my deepest coin. I'm getting allot of faint signals with no VDI an I'm digging a ton of trash simply bcuz I'm unclear if I'm missing something. Any suggestions would be great appreciated.
X70 I just got mine two weeks ago At every turn or change in setting I'm getting worse off! I finally found a deep penny 8+"S but lately everything is 3"s or lower : ( MY XL pro can do that.) I have two coils the 6'DD 18.75kHz the 10X5' 18.75kHz elliptical DD and the stock coil I'm hunting in moderate to sum what higher mineralized ground as the Parks are next to rivers and I've dug black sand 200' from the river! an a lot of area with no gound noise anyway I've tried was skunked today until I switched to tracking with beach mode on and got 8 pennies immediately good right? well they were on the only at 1" I know I'm missing coins. and just haven't come up with a good setting VDI ( just sumps unless target is under 3"S) GB NC thresh hold all together I've been hunting on pattern 1 with threshold at 13 and sensitivity at 20-27 problem was I didn't record or pay attention when I dug my deepest coin. I'm getting allot of faint signals with no VDI an I'm digging a ton of trash simply bcuz I'm unclear if I'm missing something. Any suggestions would be great appreciated.
Amazon Forum Fav 👍
Upvote
0