Most common etrac target ids for gold rings

marjam

Sr. Member
Joined
Nov 17, 2012
Messages
491
Reaction score
440
Golden Thread
0
Most common etrac target id's for gold rings

Hey guys. I have had my etrac for a little over 2 years now and while I have dug more silver with it than any other detector I have had, I have yet to dig any gold rings with it.
Just wondered what is the most common target id's for you all in the gold ring range. I dig everything around the nickel range but not so much from say 12 16 to 12 27. Is this where most of everyone's gold finds come in? I hunt in some trashy areas and while I will start out digging it all after an hour I will give up and start digging only high tones and other signals that have good potential to be coins. Just wondering if anyone has tracked this. Any help is,appreciated.
 

Depending on the ring anywhere from 12-03 to 12-38. so dig them all if you want gold rings
 

Thanks. I know they fall in that range but just wondered if there was a more common target id that pops up than others. That way after I get tired of digging it all I can still concentrate on that range most common for gold rings. It could be that no one has done it but it would be interesting to see if data exists out there.
 

They are all over the place. We all wish there was a magic way of making them appear in our plugs.. But sadly no.
 

If you want gold, you have no choice but to dig all the conductive trash. Every ring is different in size, shape, purity and the metals used to harden it.
 

There a fellow that posts here that has taken the time to make a very extensive chart. He classifies his rings by carat/composition and size and it is very enlightening. Yes, gold rings are all over the map, but there are some interesting trends as well.
Sorry, but I cant remember his name. It hasn't been too long since he posted a link to the chart if you want to do a thorough search on the eTrac and CTX (he's posted in response to both machines iirc). I've also seen his chart referred to on other forums fwiw.
 

I just dug a gold ring 3 days ago that read 12-01! Tiny 14K band. I've found some real nice gold and platinum rings that read 12-02. I've also had them on the other end of the scale with a big man's 18K that read 12-34. I've even had the ferrous numbers range from 10 to 14 on gold also, so as you can see, you'll need to dig a lot of trash to get the treasure!
 

There a fellow that posts here that has taken the time to make a very extensive chart. He classifies his rings by carat/composition and size and it is very enlightening. Yes, gold rings are all over the map, but there are some interesting trends as well.
Sorry, but I cant remember his name. It hasn't been too long since he posted a link to the chart if you want to do a thorough search on the eTrac and CTX (he's posted in response to both machines iirc). I've also seen his chart referred to on other forums fwiw.

I remember seeing that. It was from a beach hunter who had hundreds of gold rings. He scanned each one and posted a list of the FE-CO numbers with how many rings read as that. Even though they did spread from 01 up to 36 or 38, there was a few number zones where most of them fell into.
 

There a fellow that posts here that has taken the time to make a very extensive chart. He classifies his rings by carat/composition and size and it is very enlightening. Yes, gold rings are all over the map, but there are some interesting trends as well.
Sorry, but I cant remember his name. It hasn't been too long since he posted a link to the chart if you want to do a thorough search on the eTrac and CTX (he's posted in response to both machines iirc). I've also seen his chart referred to on other forums fwiw.

That is exactly what I had hoped someone had done. Although I know gold has the potential to fall anywhere from CO 1 all the way up into the 30s I wondered if there was something like this out there. I have dug a ton of trash but no gold so far.

Thanks again.
 

Where are you "digging"?
 

The gold rings I have found hit in the 20's, they were average sized bands. My class ring comes in at 34. Tiny ones are lower, fat ones are higher. As soon as you decide to only try to hunt one number, the ring will be a different number.
 

I guess I just need to start digging everything all the time and not just some of the time. I definitely want to start digging jewelry and up to this point my jewelry has consisted of the silver variety. Just gotta get disciplined and dig it all I guess.
 

I personally just can't dig it all. But what I do is dig everything until I am worn out then I remember where I left off on digging it all then comeback later to pick up where I left off.. Some places just have so much trash it is overwhelming to dig it all all the time..
 

I guess I just need to start digging everything all the time and not just some of the time. I definitely want to start digging jewelry and up to this point my jewelry has consisted of the silver variety. Just gotta get disciplined and dig it all I guess.

The trick is to dig it all only when your at a spot that people loose jewelry regularly or you will just be bringing home bags of trash. Beaches, swimming holes or soccer, baseball and football fields if you inland like me. If your not in a good spot the silver works fine though :)
 

Here's one chart I've run into - pretty close by experience:

ETrac Target Card Sheet.webp
 

The trick is to dig it all only when your at a spot that people loose jewelry regularly or you will just be bringing home bags of trash. Beaches, swimming holes or soccer, baseball and football fields if you inland like me. If your not in a good spot the silver works fine though :)

That is pretty much where I hunt, but I have found it hard to be disciplined to dig it all. I am going to try and dig every signal for the duration of the next hunt and see what happens. I can't say I will be able to do this everytime, but the more junk targets I dig will increase the chances of finding gold.

As soon as I dig that first piece of gold, I will be sure to post it along with thanks to everyone that gave feedback on this.
 

Here's one chart I've run into - pretty close by experience:

View attachment 1240685

Also as a side note... The last ring I dug came in as 7-8 Fe instead of a 11-12. It was laying flat. I also noticed air testing several other rings that this would happen on occasion. Don't know if it tries to read the thickness of the band or what as it is thin laying flat.
 

I guess I just need to start digging everything all the time and not just some of the time. I definitely want to start digging jewelry and up to this point my jewelry has consisted of the silver variety. Just gotta get disciplined and dig it all I guess.

I primarily hunt for coins in trashy areas and I only have the patience to dig for gold for a short time before I get tired of digging junk. So, what I do to increase my chances of finding gold without burning out on it is: dig every solid co. 12, 13, 14, plus 30 and above and maybe add a couple of others. This way I'm adding in a few numbers that aren't typically coins and could potentially be gold. Also, instead of thinking about the magic gold number, maybe start eliminating the really common junk numbers. For me, co 11 is almost always a beaver tail(and there are tons of them). I realize I probably walk over gold once in a while and maybe a lower conducting nickel, but in these trashy parks, you could easily spend all day digging up trash and miss the opportunity to find some silver

Just my 2 cents
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom