Need help doing something

[cudamark]

U.S. $1 gold coins and 2 Peso gold Mexican coins can ring up in that low non-ferrous zone. If you have particular numbers that are just driving you nuts, use the check mark/X button to kill those numbers. On old sites, I hesitate to add any discrimination. I'd hunt in all metal and just ignore the target range I wish to pass by and go by the depth meter if the targets you want are at a consistent depth.

 

Amazon Forum Fav 👍

A History of Mining on the Kenai Peninsula, Alaska - Grab it through Amazon!

[A2coins]

My town founded 1826 of I dug every solid signal I would not move more than 10ft in an 8 hour days pull tabs are out state flower literally and I want gold but I want to have fun also. I have hints where I dig just high tones 21 up and days I'll dig everything for an hour or 2 before I'm ready to put the detector in a tree lol

 

[Donut]

I understand you learning and playing with your detector and that’s how you learn
a quick way is if you are in a trashy are when the undesirable number is on your screen you just have to just have to push the accept/reject button.
or you can do like said above and do a complete pattern setup then save it to the profile. Then take it out of the profile and hold down the pattern button and it will reset the pattern to factory reset and still leave your changes in the profile.
if you do a complete reset from power off it will erase the profile. I do the manual reset that way I can switch back and forth between the two.
Hope I explained that ok.

Doug