Oak Island CTX3030 ?! Is it the mac daddy of MDs?

davinci

Full Member
Joined
Jan 2, 2013
Messages
127
Reaction score
25
Golden Thread
0
Primary Interest:
All Treasure Hunting
Upvote 0
WELL SAID!!!

The last time I checked metal detecting is a hobby or recreational activity. I know it is for me. If someone is fishing in a canoe or a 30ft offshore boat what should it matter to someone else? Hunting, an off the rack rifle or custom made? If it's what you want and it works for you that's what matters.

Too many people out their take cheap shots at equipment because it costs too much or too little to suit THEM. If it's your dime, get what makes you happy, and enjoy it.
A hobby for most a living for some … So it is not only a hobby..
 

.. Tell the prospectors and the very few that make a living at this … And then see the looks they will give you..

You said it the very few. I doubt those very few care what we think.
 

I'm not sure there is a "be all do all, macdaddy" unit as detector technology is always evolving.
With that said, I don't have a hot rod, Harley, or brand new TV but I do have a CTX that I treated myself to!
It's perfectly balanced and weighs the same as my Excal on a straight CF shaft!
Treat yourself to whatever you'd like. Life is too short (even at a hundred years) not to!
 

Last edited:
And I will go an additional step further by saying that I really dont care about finding anything. Its just a pleasure being out and smelling the good earth and feeling the turf under my feet, and the sunshine on my face, and the wind in my hair. A silver coin in the hand is only a bonus! I cant count how many successful hunting or fishing outings I have had where not a fish in the boat, nor a rabbit to be had, yet the day was great!

Hey! a bad day metal detecting is better than a good day at work, the office or whatever. I am not against golf either, since I cannot but suspect it keeps the unworthy from discovering metal detecting. There are two types of metal detectors - those who detect for fun and those who detect for profit. I am in for the fun and the learning. So whatever you buy get out and enjoy it, it is the best time you will have, even if you don't find anything, like it was said above, if you do make a find it's a bonus. - Cheers
 

A hobby for most a living for some … So it is not only a hobby..

Very true. For the small number of folks who detect for a living, I am guessing, the COST of their equipment is not the primary concern. Using equipment that gets the job done would be the first order of the day.

I still think that the overwhelming majority of detectorist's, don't do it as their primary source of income.
 

Very true. For the small number of folks who detect for a living, I am guessing, the COST of their equipment is not the primary concern. Using equipment that gets the job done would be the first order of the day.

I still think that the overwhelming majority of detectorist's, don't do it as their primary source of income.
That is the truth a small few you see on the treasure forums do it for a living…… But the ones that do it for a living those are the ones that that put out the big dollar for equipment … They need the best to make a living ..
 

Last edited:
The biggest difference that I found with the CTX is that it will see multiple targets at once and the ID is spot on. Separation is good, but not as good as perhaps the Deus.

Other than that, I feel that, I feel that it is somewhat of a status symbol swinging this expensive, name brand machine. These companies could also be paying money to have their products shown on television.
 

If you are not hunting salt water wet sand or oceans you may want to consider the AT Pro to start. Easier learning curve and it is very good on land. I used one for 3 years before going to the CTX. I now keep it as a backup.

The only reason I went to the CTX was I wanted to have a machine I could use in the ocean in addition to the land. Yes, the ATP works in the ocean but it will only go perhaps 5" deep. This past week I was waist deep in salt water and got a ring hit with the indicator at 24". I wasn't able to retrieve it after about 20 minutes. I did clean it with a cue tip, cleaned the o ring and put a little silicon grease on the rim of the battery pack before submerging. No issues what so ever. In fact when I took off the battery pack for recharging I heard a little suction relieve noise.

The CTX is a dream to use. Great balance (go all day), adjustable, retractable shaft if you want to change the balance. Completely programmable search settings. Target id is far superior to the ATP. It is probably not a machine for a first time user as you may get frustrated with it. I bought mine from someone who gave up on it. Save about 800 from a new unit with only 5 months gone from a 3 year warranty.

I could not have handled the CTX right off the bat with my first machine. But now the only reason for me to use the ATP is I have a 15" coil. I will use it to cover areas to see that I have not missed anything. Eventually I will get the 17" coil once my budget recovers.
 

The biggest difference that I found with the CTX is that it will see multiple targets at once and the ID is spot on. Separation is good, but not as good as perhaps the Deus.

Other than that, I feel that, I feel that it is somewhat of a status symbol swinging this expensive, name brand machine. These companies could also be paying money to have their products shown on television.
That's right it is just a status symbol for most … Bragging rights look at me ….sort of thing…….And you know that when you see a brand of detector being used on any TV show … that show is getting or the one swinging it is getting money for that detector to be there on the show..
 

That's right it is just a status symbol for most … Bragging rights look at me ….sort of thing…….And you know that when you see a brand of detector being used on any TV show … that show is getting or the one swinging it is getting money for that detector to be there on the show..

I don't see it as bragging rights using the best equipment you can afford. Maybe jealousy issues for some but why would you want to waste time by not using the best you can afford. You are right about TV shows it would be silly to believe otherwise.
 

I use an inexpensive Tesoro Cibola. Was out with it yesterday picking out Civil war bullets out of really bad mineralized and absolutely SURROUNDED by nails. Nails by the dozens and less than 2" away from the bullets. I skipped the nails and dug the bullets. It's up to you, but I'd try to find a local dealer where you can try out something before you buy it. I recently got three much more expensive machines by two other manufacturers and wound up reselling them pretty quickly. Just didn't like them, they did not go much deeper and were much harder to use.
 

I use an inexpensive Tesoro Cibola. Was out with it yesterday picking out Civil war bullets out of really bad mineralized and absolutely SURROUNDED by nails. Nails by the dozens and less than 2" away from the bullets. I skipped the nails and dug the bullets. It's up to you, but I'd try to find a local dealer where you can try out something before you buy it. I recently got three much more expensive machines by two other manufacturers and wound up reselling them pretty quickly. Just didn't like them, they did not go much deeper and were much harder to use.

You make a great point they will not be any better if you don't learn how to use them. When I bought my first explorer I thought I made a big mistake but pushed myself to use it. People that don't learn them are the ones saying they are no better than this brand or that brand.
 

Right on dirtscratcher. And it depends on what you're hunting. And where. I really could have used a tiny coil yesterday. I like the really light weight machines. Arthritis monster got me. I'm positive some of the pricier machines will go deeper, but with a couple I saw being used this weekend, my time out with one would be minutes, not hours as with a light weight machine. Where I was digging, the ground was rather hard and rocky and the targets were not deep. That makes a difference too. When I'm at the beach it gets so annoying digging a small pieces of aluminum 15 inches down! One thing I've never especially liked is the hi-low tone types when you've got 6 targets under a coil at one time. Which happens a lot for me. This one house in particular. 5 coins in one hole, move 12" and 3 more (modern unfortunately).
 

You see i think about getting a new big buck detector …. And then i think i have seen and tried out most of them … And i have the best detector made so why buy another one that will not do any better than the one i use now for coins & jewelry … that detector is the ….Minelab Sovereign… The best coin & jewelry detector …Minelab has ever made...
 

I don't see it as bragging rights using the best equipment you can afford. Maybe jealousy issues for some but why would you want to waste time by not using the best you can afford. You are right about TV shows it would be silly to believe otherwise.
Some people want the most expensive because they think its the best...the most expensive doesn't always mean its the best.
 

Some people want the most expensive because they think its the best...the most expensive doesn't always mean its the best.

I'm guessing you haven't put a lot of time in on a as you put it expensive detector. I haven't with a 3030 but hunted a lot with explorers etrac some top of the line whites and seen them go deeper and Id better than mid priced detectors to not believe they definitely have an edge. If you or anyone else are happy with what you have and don't try anything else then that will be the best you'll know for sure. When I detect I want to have the best detector I can afford because this is my biggest use of my free time why waste it. I bought a detector once that was supposed to be the best bang for the buck and find everything those expensive detectors would. Well that was a total waste of 450 dollars and a year and a half that I will never get back.
 

Best is subjective! Best usually means how well the guy or gal holding it knows their particular machine and ground.

I've recently acquired a CTX 3030 and it's feature rich set makes it one of the best detectors I've used to date. The Target ID is amazing and the dialing it in to your personal taste is fantastic!

The balance of the CTX is perfect and at 5.20 lbs. it's only 1 ounce heavier than my Excal that's mounted on a carbon fiber shaft! It has a trigger pinpoint much like what OBN 's pinpoint mod achieves and comes with a backlit screen. All awesome features to help make your detecting experience a great one!

Is it the best? Well, it will find targets that are deep. Just like the other brands.
 

I'm guessing you haven't put a lot of time in on a as you put it expensive detector. I haven't with a 3030 but hunted a lot with explorers etrac some top of the line whites and seen them go deeper and Id better than mid priced detectors to not believe they definitely have an edge. If you or anyone else are happy with what you have and don't try anything else then that will be the best you'll know for sure. When I detect I want to have the best detector I can afford because this is my biggest use of my free time why waste it. I bought a detector once that was supposed to be the best bang for the buck and find everything those expensive detectors would. Well that was a total waste of 450 dollars and a year and a half that I will never get back.
I was talking about everything in general, not just detectors...if you think the most expensive always means the best, that's fine, but its not always true.
 

I was talking about everything in general, not just detectors...if you think the most expensive always means the best, that's fine, but its not always true.

You are correct my favorite detector is my explorer xs I paid 400 dollars for but at one time it was one of the more expensive. Sometimes you do get what you paid for. It just seems easy to say otherwise without actually trying one.
 

[h=2]CTX3030 ?! Is it the mac daddy of MD's?[/h]

Hmmmmm. Top Pimp - loud, pushy, more crook than hard worker, flashy without substance.

No, I think it's better than that. But, as mentioned plenty before, the best detector for a specific use will be the one specifically designed for that use. You get up around $2,500 it sure as h3ll better be a top-end detector. And Minelab is a trusted name so I'd say it was a great detector.


Be glad to review one if someone would loan me their's.
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom